Tutorial: Raspberry pi display case 3d print | Coupon code

  • 4.3inch DSI LCD Capacitive Touch Display with Protection Case for Raspberry Pi 4 B/3 B+/3 B,800×480 Resolution IPS Screen Wide Angle,MIPI DSI Interface
    4.3inch Capacitive Touch Display for Raspberry Pi, 800×480, IPS Wide Angle Supports Raspberry Pi4B/3B+/3B. MIPI DSI interface, refresh rate up to 60Hz. Capacitive touch panel, support 5-point touch Supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver free.
  • SunFounder Raspberry Pi 4 Display Touchscreen 7 Inch HDMI 1024×600 USB IPS LCD Screen Display Monitor for Raspberry Pi 400 4 3 Model B, 2 Model B, and 1 Model B+, Windows Capacitive Touch Screen
    HD VISUAL ENJOYMENT: SunFounder RPi touchscreen with HD 1024x600 resolution, 16.7M(8bit) color numbers give high color restore display. Rectangular ratio 16:9 display format conversion. IPS 170° full wide viewing angle gives you a crystal-clear viewing experience of all your content. MULTIPLE APPLICATION: Supports Raspbian/Win7/Win8/Win10(Plug and play), Android/Linux (need to be configured first). And you can download Installation Manual for Raspberry Pi from the selling page.( Note: the HDMI-Micro HDMI cable especially for Raspberry Pi 4, HDMI-HDMI cable for Raspberry Pi 3) LOW COMSUMPTION:Low power consumption and have a good effect connect with windows computer, no trouble with installing drivers for various systems. WIDE TOUCH AREA: The module size with 165.30(W)*121(H)*7.75(T), and the Active area is 154.21(mm)*85.92(mm). Most of the screens on the market will have this touch problems if the software is not adjusted, but this small hdmi screen no worries to reach the side of the screen. PLUG & PLAY: Equip with Micro USB and HDMI port support. Connect the screen to device via HDMI interface and power it via USB. To achieve touch function powered by USB, do not require power cord and drive-free.
  • Raspberry Pi 10 Inch Touch Screen - SunFounder 10.1" HDMI 1280x800 IPS LCD Touchscreen for RPi 400 4 Model B 3 Model B+ 3B 2B LattePanda Beagle Bone
    HIGH RESOLUTION - The 10.1 inch IPS touchscreen LCD monitor with high resolution of 1280×800 pixels. PLUG AND PLAY - Just connect the control board and the screen by an HDMI cable and it can work immediately, needless of driver. UNIVERSAL FASTENING POSITION - Supports Raspberry Pi 400 4 3B+,3B, 2 Model B, and RPi 1 B+, LattePanda, and PC. MULTIPLE APPLICABLE OS - Supports Raspbian, Ubuntu, Ubuntu Mate, Windows, Android, Chrome OS. And you can download 3D Stand Installation Manual from the selling page. THOUGHTFUL DESIGNED - Keeps itself flat with 4 copper standoffs of the same height at the back case, also for fastening.
  • UCTRONICS 7 Inch IPS Touch Screen for Raspberry Pi 4, 1024×600 Capacitive HDMI LCD Touchscreen Monitor Portable Display for Raspberry Pi 4 B, 3 B+, Windows 10 8 7 (Free Driver)
    Video-audio Joy: 1024 x 600 pixels high resolution (support up to 1920 x 1080 input and auto-scaling). 178° wide viewing angle and adjustable backlight make sure high visual quality; 3.5mm audio/headphone jack makes the display no longer silent. Perfect for Raspberry Pi 4: Micro HDMI adapter included, hassle-free connection to Raspberry Pi 4 Capacitive Multi-touch: higher touchscreen sensitivity, easy to control; 5 points Multi-Touch capability (require OS and software support) Plug and Play: Can be connected to almost any device with an HDMI input and touch control through the USB connection, you don’t need to install any drive. Wide Compatibility: compatible with Raspberry Pi 4B/3B+/3B and all other Model A&B series, can also work as a general-purpose compact touchscreen monitor. Please search ASIN B085MY9HNX to get the screen with stand.
    64.99 $
  • UCTRONICS for Raspberry Pi Touchscreen, 3.5 Inch High-Speed SPI TFT LCD Portable Display with Stylus Pen
    Support All Raspberry Pi Models: Designed for Raspberry Pi, can be directly inserted into Raspberry Pi 4 B, 3B+, 3B, 2B, B+, Pi Zero & w through GPIO pins, no extra power supply needed. NOTE: for Octoprint, please download the driver at https://github.com/UCTRONICS/UCTRONICS_HSLCD35/tree/master/Octoprint Resolution: 320x480 (physical) with resistive touch control, the resolution can be adjusted when working with FBCP software driver. Smoother Display: Support 125MHz SPI signal input without flicker; Up to 60fps refresh rate when working with Raspberry Pi, higher than most similar products, great for playing game and video. More Features: Self input diagnose instead of the blank screen; Support manual backlight control; Hotplug support, without rebooting the Pi; Support dual-screen display (the Raspberry Pi can connect to another HDMI screen at the same time); Can work with Raspbian/Ubuntu/Kali/Retropie/Octoprint system, all support touch function. Handy Mini Touch Screen: the overall dimension of this tiny screen is 3.38”×2.20” (86mm×56mm), the exact size of a Pi, more flexible and lighter than the bigger screen.
    21.99 $
  • TFT Touch Screen, Kuman 3.5 inch 320x480 Resolution TFT LCD Display with Protective Case + 3 x Heat Sinks+ Touch Pen for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B (TFT Touch Screen) …
    3. 5 inch resistive touch screen Module SPI Interface for Raspberry Pi 2 3 B/B+/A+ /A/B, 320*480 resolution, better display. Upgraded for Raspberry Pi B+; No external power supply needed Software package contains everything you need to start from ground zero. Compatible with Raspberry Pi 3 B RPi 2B/B+/A+ /A/B?Raspberry Pi not included Please note that you need to install our jessie OS with the pre-installed drives on a new or format SD card, if you dont install our jessic OS with the pre-installed drives, you will be starting at a white LCD panel. We have do test on OS, if you want to use other system, maybe you need to add drivers by yourself. Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE, contact us BY Email to get documents. Pi 3 Model B case, 2016 Update Better RPI 3 case - High quality PC Protective Case with 3x Heat sinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+
    28.99 $
  • NeeGo Raspberry Pi 4 Screen Case for Raspberry Pi Monitor Touchscreen Display 7-inch
    This case is designed to house your Raspberry Pi 4 board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Get it complete with the Philips Screwdriver 3"- Included All ports are accessible- All ports of the Raspberry Pi are accessible, including the HDMI
    24.99 $ 29.99 $ -17%
  • Vilros - Raspberry Pi 4 Basic Kit [2GB] - Includes Fan-Cooled Case, Power Supply with Switch, Heatsinks, HDMI Adapter, & Quickstart Guide
    KEEP YOUR PROCESSOR COOL: The busier a processor gets, the more it heats up, leading to suboptimal performance. To prevent this common issue, we’ve included a pre-installed and ready-to-connect fan in the case. Also included are a set of 4 heat sinks that can help to passively expel heat from your setup. These cooling mechanisms will help push the limits of your processor and increase its flexibility. SIZABLE RAM: This Raspberry Pi 4 comes equipped with 2GB of RAM, which is the same amount of RAM many mainstream laptops contain. With 2GB of RAM, your processor will be capable of running retro gaming setups and common computer applications, media players and much more! SIMPLE TO TURN ON & OFF: This kit includes a USB-C Raspberry Pi 4 compatible power supply with an easy-to-use on/off switch that was designed specifically for the Raspberry Pi 4 model to streamline processing. IMPROVEMENTS FROM PREVIOUS MODELS: This latest model of the Raspberry Pi 4 offers groundbreaking increases in processor speed, multimedia performance, connectivity, memory and more! The desktop performance of this model is comparable to entry-level x86 PC systems. VERSATILE USE: The Raspberry Pi may have a small processor, but it is a highly adaptable little computer that can replace your desktop PC. Its functions range from practical to nostalgic, since it can power an ad-blocking server as easily as it can power an outmoded gaming setup. Other uses include but are not limited to printing from non-wireless printers, playing media, making time-lapse videos, and building multiplayer network game servers and motion-capture security systems.
    73.99 $
  • Upgraded! 7Inch IPS Touch Screen Display, TeNizo 1024x600 Capacitive HD Touchscreen Pi LCD Module Monitor, for Raspberry Pi 4/3/2/Zero B B+ A Windows MAC PC, Drive-Free, Brightness Adjustable,
    ⚡️【 High-quality Raw Materials, Excellent Precise Workmanship, Continuously Optimized & Upgraded 】: For the driver board: upgrade to adopt ENIG technology, high-end matt black appearance; For internal display screen: upgrade to adopt premium 1024x600 IPS screen with bright color, Contrast Ratio: 800:1, Brightness: 400cd/m² adjustable, Level Index up to 16.7M(8-bit). Detailed instructions, complete accessories, and timely customer service helpful email send you. ⚡️【 WIDELY COMPATIBLE 】 It’s not only a for Raspberry Pi 4/3/2/Zero/ B B+ A, Banana Pi. also compatible with like Ubuntu, Retro Pi, Debian, Kali, Windows 7/8/10, PC, Mac, Laptop, TV; Also compatible with Switch/XBOX/PS4. Windows & mac OS system plug and play, no program or software support is required. ⚡️【SUPPORT BRIGHTNESS ADJUSTMENT】: Features MENU buttons on the back of the monitor, supports adjustment of brightness, contrast and display direction according to the environment you need, show you a bright and colorful display! Compared with the others cannot support brightness adjustment, which really brings you greater convenience. ⚡️【 ACCURATE MULTI-TOUCH, EXCELLENT RESPONSE 】- Excellent touch sensitivity make you to slide, scroll, select, zoom in, zoom out and move the cursor in just about 3-5ms faster response time. MultiTouch delivers a EXCELLENT touch experience with pin-point accuracy, which offers 5 points of multi-touch, multi-user technology, making it easy for multiple users to collaborate and interact at the same time.
  • kuman 3.5 Inch Touch Screen TFT LCD Display SPI with Touch Pen for Raspberry Pi 3B+/ Pi 2B, Pi Zero W, Pi A/B
    The 3.5 in Touch Screen can support two screens simultaneous display(the Raspberry Pi can be connected to this screen and another HDMI screen at the same time). This 3.5 inch resistive Touch Screen can be directly inserted into any version of the Raspberry Pi (Raspberry Pi zero, zero w, a, A+, b, B+, 2B, 3B, 3B+).Raspberry Pi is not included. This Touch Screen Support for Raspbian/Ubuntu/Kali/RETROPIE systems, We provide drivers and image freely. (Please scan the QR code on the instruction to download it) The Raspberry Pi screen can work with fbcp software driver, you can adjust the resolution by the software (The RPI screen original resolution is 320×480). The Raspberry Pi Display support 125MHz SPI signal input, It can display stable without Flicker. When it work with Raspberry Pi, the refresh rate is about 50fps, it is enough to play the video and game.