Tutorial: Line follower robot arduino code pid | Technical sheet

  • seeed studio Wio Terminal: ATSAMD51 Core with BLE 5.0 & Wi-Fi 2.4G/5G Dev Board ,Compatible with Raspberry Pi,Support Arduino, MicroPython, Designed for IOT Projects
    【Highly Integrated Design 】Here we bring you Wio Terminal, equipped with a 2.4'' LCD Screen, onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm), packed multiple functions in a 72 x 57 x 12mm tiny but stylish enclosure. Instead of being a single embedded functional module, Wio Terminal is a simple and tiny device to build I/O with the physical world. 【Powerful Processor and Reliable Wireless Connectivity】Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity supported by Realtek RTL8720DN. It runs at 120MHz (Boost up to 200MHz) and supports both Bluetooth (BLE4/5.0) and Wi-Fi (2.4G/5G), providing a more powerful IOT capability than ESP32. 【Compatible with Raspberry Pi and 300+ Grove Modules 】Wio Terminal is equipped with various peripherals, including two multifunctional Grove ports for Grove Ecosystem and 40 Raspberry Pi compatible GPIO pins for more add-ons. By connecting Wio Terminal to Raspberry Pi, you can start programming and collect environmental data directly, with no need for soldering or breadboards. Over 300 Grove modules are available on Seeed and waiting for you to explore! 【USB OTG Support】Accessible Devices(as USB-Host): Mouse, Keyboard, MIDI Devices, Xbox/PS Gaming Controllers, 3D Printers; Simulated Devices(as USB-Client): Mouse, Keyboard, MIDI Devices. 【Rich Software Support】 lots of software supportted by Wio Terminal, such as Arduino, MicroPython, ArduPy, AT Firmware, Visual Studio Code, CircuitPython (coming soon).
  • ELEGOO UNO R3 Project Smart Robot Car Kit V4.0 with UNO R3, Line Tracking Module, IR Remote Control Module etc. Intelligent and Educational Toy Car Robotic Kit Compatible with Arduino Learner
    ELEGOO Smart Robot Car: An educational kit based on Arduino platform for beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education for Arduino. Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc. Easy to Assemble: All the module interface has been modified with XH2.54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors. Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included. You can also download the same tutorials online Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Note:(Applicable Age : 13+)To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.
  • SZDoit 4WD Smart Metal Robot Car Chassis Kit for Arduino / Raspberry pi DIY Robotic Steam Platform with 4pcs TT Encoder Motor, 65mm Rubber Wheel, Speed Measure Encoding Disc
    Solid: the frame is metal and beautiful. The load is about 0-0.5kg. It is the best choice for your function realization. Cheap: Maybe it is very cheap for all the diy metal smart car chassis. So, many people would like to make a diy moving platform. Convenience: This car is very installed conveniently, by just installing some srews and nuts. So, you can think carefully for the program code. Compatible: This smart car chassis can be compatible with many controller, like arduino, raspberry pi, stm32, and other chip.
  • diymore 2WD Smart Robot Car Chassis Kit with 2 Motor (1:48) Speed Encoder Battery Box for Arduino UNO Project
    This car is the tachometer encoder. Mechanical structure is simple, it is easy to install. No add-ins is very convenient, the entire system highly integrated. Can be used to measure distance, speed. 4 on the 5th battery compartment, convenient power throughout the system in a switch, while starting and stopping. Note: Motor power supply is 3V~6V. All the parameter above is tested without load.
    14.99 $
  • HiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
    Communication Interface: IIC 16-way steering gear control Voltage: DC5-10V power supply The PCA9685 chip is wrapped in the center of the board All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
    9.99 $
  • VKmaker New Avoidance Tracking Motor Smart Robot Car Chassis Kit Speed Encoder Battery Box 2WD Ultrasonic Module with Tutorial CD
    mechanical structure is simple and very easy to install. The package will come with tutorial CD and test code. car with four on the 5th battery compartment, convenient to the entire system power supply. At the same time equipped with a switch, easy start-stop system. Without additional very convenient, so that the whole system is highly integrated car shop with L298N driver module, four tracking module, as well as 51 control unit seamless, simple and good-looking components of the system! car comes with 20 wire tachometer yards, with photoelectric gun shop can be quickly formed a gun systems. You can speed, distance, composed of closed-loop systems.
    22.88 $
  • OSOYOO Omni-directinal Mecanum Wheels Robot Car Kit for Arduino Mega2560|Metal Chassis DC Motor Robotic DIY|STEM Remote Controlled Educational | Mechanical DIY Coding for Teens Adult
    OMNI WHEELS ROBOT CAR: 4WD Omni-directional wheels and DC Motor robotic car uses the latest mecanum wheels for omnidirectional movement and allow your robotics to not only travel forward and backward, but also sideways and diagonally((Left/Right Parallel Shift,Forward/Backward,Upper Left/Right Diagonal shift,Lower Right/Left Diagonal Shift).Perfect for tight spaces. SIMPLE, INTELLIGENT, FUN PROJECT: Control your OSOYOO Omni Wheels Robot Car by Android and iOS App, allowing many additional functions such as imitation driving and WiFi controlled auto driving.This intelligent, new technology supports various projects such as line tracking, obstacle avoidance and gravity sensing control. THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 3-Points Line Tracking Modules, Obstacle Sensors, Voltage Meter, Acrylic Car Chassis, 4 Motors 4 Mecanum Wheels, 18650 Battery Box. MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET: Basic Tutorial with Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance — Practice and Become a Master!
    119.00 $
  • HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
    Communication Interface: IIC 16-way steering gear control Voltage: DC5-10V power supply The PCA9685 chip is wrapped in the center of the board All PWM output lines have a 220 ohm series resistor protection and can easily drive LED
    6.99 $
  • Ximimark PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot,2Pcs
    Using I2C communication, built in PWM driver and a clock. Green power indicator lamp. 16-way steering gear control. Includes reverse polarity protection on the input board. Using only two pins, control 16 free-running PWM outputs. All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
  • MicroBotLabs ArmUno 2.0 MeArm and Arduino Compatible DIY Robot Arm Kit with MeCon Motion Control Software and Arduino Source Code Via Download Link
    Robotic Arm Kit includes Servo motors, Structural pieces and all Fasteners needed for assembly Plus MeCon Software and Arduino Source Code Via Companion Web Site and Download Links. Windows PC Motion Control Software Allow you to Teach and Record Motion Paths for Automatic Playback Make your own desktop size 4-axis parallel-mechanism Mini Industrial Robotic Factory Arm! This kit features a Companion Web Site full of information resources and makes a great educational resource kit for robotics and micro controllers. Precision Laser Cut Parts Require only a Screwdriver to Assemble and an Arduino Micro Controller for the Servo Motor Logic - *(Screwdriver and Arduino not included)*