Tutorial: Arduino yun example projects | Technical sheet

  • Arduino Sketches: Tools and Techniques for Programming Wizardry
  • Arduino Programming: Step-by-step guide to mastering arduino hardware and software (Arduino, Arduino projects, Arduino uno, Arduino starter kit, Arduino ide, Arduino yun, Arduino mega, Arduino nano)
  • SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector
    All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units Integrated low power 32-bit CPU could be used as application processor The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable.
  • Arduino Nano 33 BLE with Headers [ABX00034]
    Designed for short range BT interactions and power savvy projects. Small (48mm x 18mm) and robust board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F. The board’s architecture is fully compatible with Arduino IDE Online and Offline with dedicated libraries; it has a 9 axis Inertial Measurement Unit (IMU) and a reduced power consumption compared to other same size boards. Clock 64MHz, Flask 1MB, RAM 256KB. Two 15 pin connectors - one on each side of the board.
    22.50 $ 25.00 $ -10%
  • SparkFun ESP32 Thing Developement Board WiFi and Bluetooth compatible microcontroller for IoT and prototyping projects with Integrated LiPo battery charger 4MB flash memory 3 to 3.6V operating range
    Dual-core Tensilica LX6 microprocessor, up to 240MHz clock frequency, and 520kB internal SRAM Integrated 802.11 BGN WiFi transceiver and Integrated dual-mode Bluetooth (classic and BLE) 2.5 µA deep sleep current saves battery for more time between charging or battery swap 28 GPIO pins and 10-electrode capacitive touch support to use in you project. Soldered headers not included. Use with Arduino, MicroPython, or Espressif IoT Development Framework. Uses Micro-B USB
    19.28 $
  • XCSOURCE 5pc Pro Mini Enhancement ATMEGA328P 16MHz 5V Compatible Arduino PRO Module TE362
    ATmega328 running at 16MHz with external resonator USB connection off board Supports auto-reset Max 150mA output Over current protected
    18.99 $ 19.99 $ -5%
  • Arduino Nano 33 IoT with Headers [ABX00032]
    The ease of use of a Nano board with the addition of secure IoT and BT connectivity Small (48mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating
    31.36 $
  • DIYmall U R3 Development Board ATmega328P Microcontroller Compatible with Arduino,with Blue USB Cable
    1, U R3 board is very widely ranged used, it contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. 2, Microcontoller based on the ATmega328 3, the board is small but exquisite, it is a good choice for you to start your own DIY arduino projects. 4, link to buy DIYmall mega 2560: https://www.amazon.com/dp/B07YB6MMMS 5, What you will get is: 1 X DIYmall U R3 Dev.board, 1 X USB cable
    13.99 $
  • SparkFun VR IMU Breakout - BNO080 Combination triple-axis accelerometer/gyro/magnetometer SiP Virtual Reality Triple axis sensor board I2C and SPI Qwiic connector For Android-based cellular devices
    Operating Voltage: 1.65V - 3.6V. I2C (Default): Up to 400kHz. SPI: Up to 3MHz. UART: 3Mbps Rotation Vector: Dynamic Error: 3.5° Static Error: 2.0° Gaming Rotation Vector: Dynamic Error: 2.5° Static Error: 1.5° Heading Drift: 0.5° / min Geomagnetic Rotation Vector: Dynamic Rotation Error: 4.5° Static Rotation Error: 3.0° 2x Qwiic Connectors for easy no soldering connection. Also breadboardable with 0.1” spaced pins. Board only. Does not include microcontroller or wire connectors.
  • Treedix 45pcs Sensor Modules Kit Compatible with Arduino Project, Electronic Project, UNO, Mega2560
    To learn Arduino or other controller, sensors are required. We need data to control, such as Photo-resistor Module, Temperature Sensor Module, IR Receiver Module, etc are all commonly used. We now offer a suite of 45 commonly used sensor modules for you to use, learn and practice. For Arduino starter, Arduino hobbyists or electronic major students to use this kit to do various kinds of tests and experiments with so many sensors available at hand. 45 commonly used sensor modules for you to learn basic knowledge of Arduino and sensors, can work well with your projects, to help you take a bigger leap on your arduino journey. All sensor modules are packaged in a good quality plastic box with individual compartment, easy for storage and carry. 100% compatible with Arduino official IDE, Raspberry Pi and STM32.