Tuto: Arduino programming temperature sensor | Discount code

  • 2pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3 (2pcs DHT11)
    DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected. The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the programming effort required. Humidity Measure Range 20%-95%,humidity measurement error: +-5%; Temperature Measure Range 0-50°C,temperature measurement error: +-2 degrees. Working voltage: DC 3.3V-5V.Output form: digital output.
  • Remote Sensor Monitoring by Radio with Arduino: Detecting Intruders, Fires, Flammable and Toxic Gases, and Other Hazards at a Distance
  • KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Raspberry Pi Programming Project, Electronics Components STEM Education Set for Kids Teens Adults + Tutorial
    This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note Only provide arduino tutorials, not Raspberry Pi tutorials. Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well. 37 Sensor kit came nicely packed in a carrying case with every single sensor wrapped in plastic and in its own compartment.
  • 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3
    9.51 $
  • Getting Started with Adafruit Circuit Playground Express: The Multipurpose Learning and Development Board with Built-In LEDs, Sensors, and Accelerometer
    18.68 $ 19.99 $ -7%
  • ACROBOTIC WeMos ESP8266 D1 Mini DHT-22 Temperature/Humidity Sensor Shield for Arduino NodeMCU Raspberry Pi Wi-Fi IoT DHT22
    DHT-22 Temperature/Humidity Sensor Shield for the WeMos family of boards for the ESP8266 and ESP32 DHT-22 data line connected to pin D4 DHT-22 measurement range: Humidity 20~95%RH; Temperature 0~50℃ Easiest way to add a Temperature/Humidity Sensor to your WeMos D1 Mini project for Arduino, NodeMCU, AT+Commands (Plug and Play)
    7.99 $
  • Arduino and Raspberry Pi Sensor Projects for the Evil Genius
    21.19 $ 27.00 $ -22%
  • 2 Pcs LM35 Linear Temperature Sensor Module 0~100℃ for Arduino Raspberry pi Micro:bit detect Ambient air Temperature
    Package Content : LM35 Linear Temperature Sensor *2 ; 2.54mm 3 Pin cable *2. The LM35 chip is produced by National Semiconductor Corporation and offers a functional range between 0 degree Celsius to 100 degree Celsius with a sensitivity of 10mV per degree Celsius. The output voltage is proportional to the temperature. As this sensor can work at 3.3V which make it compatible with Raspberry Pi, intel edison, joule and curie nano. To ease the difficult of using this sensor, a Gravity Interface is adapted to allow plug&play. The Arduino IO expansion shield is the best match for this sound senor connecting to your Arduino. Application:Medical treatments, Personal controls, Industrial controls, Aeronautics and astronautics.
    11.99 $
  • ACROBOTIC WeMos ESP8266 D1 Mini BMP180 Temperature/Barometric Pressure/Altitude Sensor Shield for Arduino NodeMCU Raspberry Pi Wi-Fi IoT BMP-180 Altimeter
    BMP180 Temperature/Barometric Pressure Sensor Shield for the WeMos family of boards for the ESP8266 and ESP32 BMP180 I2C lines connected to pins D1 (SCL) and D2 (SDA), which are the default for I2C on the Arduino IDE. Default I2C address: 0x77 BMP180 measurement range: Temperature –40~85°C ± 2°C; Barometric Pressure 300~1100hPa Easiest way to add a Temperature/Barometric Pressure/Altitude to your WeMos D1 Mini project for Arduino, NodeMCU, AT+Commands (Plug and Play)
  • FTCBlock 3pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi
    DHT11 digital temperature and humidity sensor is a calibrated digital signal output temperature and humidity combined sensor, which utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. The DHT sensors are made of two parts, a capacitive humidity sensor and a thermistor.And with a high-performance 8-bit microcontroller connected. Small size & low consumption & long transmission distance enable DHT11 to be suited in all kinds of harsh application occasions. Single-row packaged with four pins, making the connection very convenient. The sensor is a calibrated temperature and humidity combined sensor and doesn’t require extra components so you can both measure relative humidity and temperature. The digital signal is fairly easy to read using any microcontroller.