Tuto: Arduino programming language definition | Last places

  • C++ for Beginners: step-by-step guide to C++ programming from basics to advanced
  • C#: The Ultimate Beginners Guide to Learn C# Programming Step-by-Step
  • Learn Programming by Coding Like a Professional: Create Games, Apps, & Programs
  • Teach Yourself Programming The Guide to Programming & Coding Like a Professional
    2.99 $
  • Seeeduino XIAO The Smallest Arduino Microcontroller Based on SAMD21,with Rich Interfaces, 100% Arduino IDE Compatible, desiged for Projects Need Arduino Micro,3 pcs
    [ Powerful CPU] Seeeduino XIAO carries powerful CPU ARM Cortex-M0+ 32bit 48MHz microcontroller (SAMD21G18), which is three times than Arduino Uno and Arduino Nano. In addition, this Arduino IDE compatible board Xiao is also equipped with 256KB flash memory and 32KB SRAM. [Rich Interfaces in a Tiny Size] There is 14 GPIO PINs, which can be used for 11 analog PINs, 11 digital PINs, 1 I2C interface, 1 UART interface, and 1 SPI interface in such a tiny size - only 20mm*17.5mm ( as small as your thumb). Seeeduino XIAO development board is the smallest Arduino compatible board in the Seeeduino series. [Fully compatible with Arduino IDE] The Seeeduino XIAO development board is perfectly compatible with Arduino IDE, you can easily develop some small projects with the help of the large and comprehensive Arduino library. As it has a 2.54mm pin pitch, it is an Arduino microcontroller that can be used even when inserted into a breadboard. [USB Type C Support] Seeeduino XIAO supports the USB Type-C interface which can supply power and download code. There are power pads at the back of the XIAO which support battery and make it designed for wearable devices to become realistic. [Perfect for Wearable and Tiny Arduino Projects] On the other hand, this little board has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects.
    21.99 $
  • Comidox 4PCS MCP4725 Breakout Module I2C DAC 12Bit Development Board 2.7V to 5.5V Supply with EEPROM for Arduino Raspberry Pi
    The MCP4725 is a single-channel 12-bit buffered voltage output DAC with non-volatile memory (EEPROM) that allows you to store configuration register bits (2 bits) and DAC input data (12 bits) to non-volatile EEPROM (14-bit) In memory. The DAC can be configured for normal mode or power-saving shutdown mode by setting the configuration register bits. The DAC allows you to send analog signals, such as sine waves, from a digital source such as the I2C interface on an Arduino microcontroller. Digital to analog converters are ideal for sound generation, musical instruments and many other creative projects. This version of the CJMCU-MCP4725 Breakout solves some of the board's problems, including IC packages, I2C pinouts, changing the overall board size to better suit your project, and some minor adjustments. The board breaks down each pin you need to access and uses the MCP4725 (including GND and signal OUT pins) to connect to the oscilloscope or any other device you need to connect to the board. There are also SCL, SDA, VCC and another GND for the basic I2C pinout. The device can be used with a 2-wire I2C-compatible serial interface and is powered by a single supply from 2.7V to 5.5V. If you want more than one MCP4725 on the bus, you can disable the pull-up resistors on this board.
    7.49 $
  • KEYESTUDIO Leonardo R3 Board with USB Cable for Arduino Projects
    The keyestudio Leonardo is a microcontroller board based on the ATmega32u4 It has 20 digital input/output pins (of which 7 can be used as PWM outputs), 12 analog inputs, a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. The Leonardo differs from other boards using separate USB-Serial chip in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard. Has fcc and ce certification that they are made from environmentally friendly production technology and materials, made function,voltage, current testing before packaging
    13.88 $
  • My Password Is the Last 8 Digits of Pi Tee | Programmer, T-Shirt
    My Password Is the Last 8 Digits of Pi lovers T-shirt. My Password Is the Last 8 Digits of Pi T-shirt for women. My Password Is the Last 8 Digits of Pi T-shirt for men. My Password Is the Last 8 Digits of Pi lovers Tee. My Password Is the Last Programmer, Math lovers T-shirt. Programmer, Math T-shirt for women. Programmer, Math T-shirt for men. Programmer, Math lovers Tee. Programmer, Math Tee for women. Programmer, Math Tee for men. Programmer, Math lovers Shirt. Programmer, Math Lightweight, Classic fit, Double-needle sleeve and bottom hem
    14.95 $
  • ACROBOTIC RGBduino (Pink) ATMega328p Development Board Compatible w/Arduino Electronics Programming
    Compatible with Arduino Uno and Expansion Boards (Shields) Pin-Compatible Layout with 14 Digital I/O (6 × PWM, 1 × I2C, 1 × SPI) and 6 Analog Inputs Includes a Micro-USB cable, just plug to a computer and start programming! New board design features built-in RGB LEDs, buttons, and a buzzer!
  • Gewbot Ultimate Starter Kit Compatible with Arduino IDE, DIY STEM Programming Learning Kit, C & Python Code, Drag-and-Drop Coding, Stepper Motor, MPU6050 Module, 37 rojects, with PDF Manual
    Ultimate starter kit Compatible with Arduino IDE: Those sensors will often being used in beginner's project. It is included Ultrasonic Distance Sensor, PS2 Joystick, Stepper Motor, 7-segment Display, etc Designed for Programming beginners and electronic enthusiasts. Drag-and-Drop Graphical Programming code are provided, a quicker way to learn programming. 37 projects, every project in this starter kit has detailed circuit graph, step-by-step tutorial and fully-tested Arduino sample codes. Service Guarantee: We have Professional technical support team who can provide very fast technical supports freely. Provided with: C and Python code.