Tuto: 3d print won t stick to glass bed | Technical sheet

  • Twotrees Original Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro 3D Printer 310X310MM
    Magnetic poles correspond to any direction. The printing matte layer has strong adsorption force and eliminates the curling edge. The fixed layer does not need to be replaced for a long time,and can be matched with multiple printing layers. Stronger magnetic durability,excellent frost resistance of the printed matte layer. 3M super-adhesive,environmental protection in line with ROHS regulations.
  • HICTOP Ender 3 pro Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235235)
    HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃ It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature The size of HICTOP glass bed is 235*235mm(9.25*9.25inch), it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2,Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro,CR-20, CR-20 Pro and other similarly sized printers The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface
  • HAWKUNG 3D Printer Glass Bed, 235x 235x 4 mm Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with 4 Clips for Creality Ender 3, Ender 3 Pro, Ender 3S, Ender 3X, Ender 5 Heated Bed
    High Quality Material: This glass bed is 100% borosilicate glass,which is resistant to cracking as a result of direct high heat and it will not warp during long term use,making it an excellent choice for 3D printer beds. Excellent Adhesion: The 3d printer glass plate was covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models. Convenient to Use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Easy to clean: Clean the platform surface with alcohol/water (If there is sweat or oil on the platform, which will lead to stickiness). Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
  • 3D Printer Glass Bed Upgraded Borosilicate Glass Build Plate for Creality CR-10 CR-10S Flat Printing Surface Tempered Glass Replacement Upgraded 3D Printer Platform 310x310x3mm with 4 Glass Clips
    【Borosilicate Glass】 High binding power when heating. Easy to separate the plastic parts when cooling. 【Size】 310mm x 310mm x 3mm. Perfectly for CR-10, CR-10S 3D printer. 【Safety】 Flat Polished Edge for safe to handle. 【Hight quality 】Resistant to thermal shock compared to regular glass. 【Flat Enough】 Reduces warping, keep the printing surface level.
    24.99 $
  • Creality Ender 3 Glass Bed Heated Bed Build Surface 3D Printer Build Plate Carbon Silicon Crystal Glass Print Bed 235x235x4mm Glass Bed Platform for Ender-3 Pro Ender 5
    【Ender-3 Printer Bed】----Our silicon crystal glass plates are all produced by Creality 3D manufacturers,quality is guaranteed.And our plate's edges are round and the four corners without sharp edges and safe to use. 【Upgrade Glass Bed】----Our glass platform has a good adhesion texture and does not warp or peel off during printing. It's thickness is twice of the ordinary glass,which can better maintain and dissipate heat.This is a big upgrade for Ender 3, a effective upgrade that worth the money. 【Easy Removal & Clean】----Our glass beds are different from magnet beds, and you will like how easy it is to slip off your prints after they cool. Moreover, our glass bed is easy to clean, you can use a drop of dawn soap on a hot towel and then follow it with a dry towel. 【Printing Essential】----We have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed. 【Application Scope】----Our creative 3D glass printing platform measures 235 x 235mm and the glass bed is 4mm thick. It is especially suitable for Ender-3, Ender-3S, Ender-3 pro, Ender-5.
    19.99 $
  • AMX3d 25 Piece 3D Printer Tool Kit - All The 3D Printing Tools Needed to Clean & Finish 3D Prints - Print Like a Pro
    If you have a 3D Printer or are thinking of buying one - these are the tools you need to make your prints look like those on the 3D Printer Box. 25 Essential tools for all 3D Printing Professionals, Hobbyists and Makers Everything needed to print, maintain and clean up 3D Models in one convenient kit This kit has everything to make 3D printing easy and the printed results spectacular. The best 3D Prints start with the best tools
    39.99 $
  • TENLOG Upgrade 3D Printer Borosilicate Glass Bed for Creality Ender 3/Ender 3 Pro/Ender 3 V2,Upgraded 3D Printer Platform, 3D Printer Glass Plate Build 235x235x4mm
    【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. 【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model. 【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature. 【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro.
    16.99 $
  • Creativity 3D Printer Platform Hot Heated Bed Build Surface Tempered Glass Plate 235x235x4 mm for Ender 3/ Ender 5/ CR20 3D Printer Accessories
    Upgraded Glass Bed: Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model. No Edge Curling: Creativity 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling. Four Binder Clipshave: We have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed. Compatible: The Glass Bed is applicable with Creality Ender 5 Plus 3D Printer. Please confirm if this tempered glass bed compatible with your printer.The 3D printer parts is applicable with Creality 3D printers of Ender3, Ender3 Pro, Ender3X, Ender5, CR20, CR20 Pro, pls confirm if this tempered glass bed compatible with your printer. Convenient: So easy to take off the model, no tools needed. The borosilicate glass bed could be fixed with middle sized clips
    14.99 $
  • Creality Authentic Ender 3 Tempered Glass Bed Platform Carbon Silicon Glass Heated Bed Build Plate Surface Print Bed for Ender 3/ Ender 3 Pro/Ender 5 / CR-20 Pro 3D Printer, 235x235x3mm
    Excellent adhesion: Creality carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water or alcohol. Easy to remove your print by hand or with a scraper. High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃. Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X .
  • Creality Ender 3 PEI Sheet,238mm x 238mm 3D Printer Platform Tempered Glass Plate Build Surface, 3M 468MP Adhesive Transfer Tape Sheets for Creality Ender 3 or CR 20
    【Dimensions】238 x 238mm (9.37 X 9.37"), PEI thickness: 0.4mm (0.016 inches), Fits the Creality Ender 3 or Creality CR 20 perfectly! 【Build Surface】PEI is the perfect no prep build surface for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed). 【Easy Install】The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed. ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives. 【Advantage】High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Cut to size for easy application with no mess. 【Compatibility】The 3D printer plateform is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20 and CR-20 Pro; confirming your printer firstly.