Strategies: Robotdyn arduino | Evaluation

  • RobotDyn - Arduino Audio Sensor, Arduino Frequency Detector Module Attachable to Arduino, Arduino Microphone Module- Sensor with Digital and Analog Output - for Arduino, STM32, Raspberry DIY Projects
    ✔️ HIGH QUALITY AND PREMIUM MADE: The most widely used Arduino Audio Sensor, Differentiates from other cheaply made Arduino Frequency Sensor/Arduino Sound Sensor by being High Quality and not made by third party vendors. All is created through Robotdyn Experts. ✔️ TECHNICAL SPECS: There is a mounting screw hole 3mm. Use 5v DC power supply. There is a threshold level and output flip. ✔️ The Sound Detector has two outputs:AO - Analog output, real-time output of the microphone signal.DO - When sound intensity is below a pre-defined threshold, the output is low. ✔️ THRESHOLD SENSITIVY CAN BE ADJUSTED: When sound intensity raises above that threshold, the output is high. The threshold (sensitivity) can be adjusted via the potentiometer onthe sensor. ✔️ THE SOUND DETECTOR MODULE: is based on a microphone and a power amplifier. It can be used for detecting the sound strength of the environment. The value of digital output can be adjusted by the potentiometer.
  • RobotDyn 2 Channel Arduino Light Dimmer, Arduino Dimmer Module, Arduino AC Light Dimmer Controller, AC Dimmer Module for Arduino, STM32, ARM, AVR, 3.3V/5V Logic, AC 50/60hz, 220V/110V
    ✔️For use with: Arduino Uno/Mega/Leonardo/Nano/SAMD21/DUE, ESP8266/32, STM32, ST8, ARM, AVR. Compatible with any ARDUINO ✔️ Dimmer can control the amount of AC voltage to be given to any device. You can see them in a fan regulator or a light dimmer switch. ✔️ It's good for a smart home if you need to turn the lighting on and off slowly. The lamp is slow damped, this creates a pleasant effect. Also can control AC motor, electric pump, tools. ✔️ Low voltage side and high voltage side is completely isolated. With line frequency of - 50Hz or 60Hz ✔️ Load power up to 3kWt, with AC voltage input. AC Phase Control Circuit (Dimming Circuit) / Home Automation, School Projects, Work Related Projects.
  • RobotDyn - Data Logger/Logging Shield Compatible for Arduino, MicroSD-Card + RTC (Assembled) with Battery
    SD card interface works with FAT16 or FAT32 formatted cards. ith this Shield can saving data to files on any FAT16 or FAT32 formatted SD card. Real time clock (RTC) keeps the time going even when the Arduino is unplugged.
  • RobotDyn - Nano I/O Expansion Shield, for Arduino Nano V3 pinout. (Assembled)
    Pinheaders for All the digital I/O ports and analog I/O ports, each IO port has a standard positive and negative power interface. Digita I/0 - 14 ports, Analog In 8 ports. Multiple pinheaders for I2C interface on the board, convenient and connection up to 6 of the I2C device. Serial (RX/TX) port pin header with power. Power stabilizer for 5V and current to 1A. DC Jack Socket and Diode with a protection of wrong power connection. RESET button in available place. Compatible with Arduino Nano v3.0 pinout
    5.99 $
  • RobotDyn - Mega Data Logger & Sensor Shield for Arduino Mega 2560, with SD-Card Reader/Writer Data Logger Module (Assembled)
    This sensor shield with data-logger for easy connecting various modules like sensors, servos, relays, buttons, potentiometers. to Arduino Mega. <br><br> Shield have extra space with the soldering area, which is highly convenient for prototyping On board have micro SD-card reader/writer, for save any information from connected sensors
    15.99 $
  • RobotDyn - LCD keypad Shield, 1602 Blue LCD Display, for Arduino Uno Mega Leonardo
    Useful LCD display for Arduino with 16 symbols and 2 lines, adjustable back-lighting. Variations for 2 colors: Green and Blue. Buttons height 10mm, for easy embed to case. . Arduino "LiquidCrystal" library is used for display programming and can be found in Arduino IDE Used Arduino i/o: digital - 4, 5, 6, 7, 8, 9; analog - A0
    7.99 $
  • RobotDyn - W5500 Nano V3 Ethernet Network Shield - Module for use with Arduino Nano
    Based on the TCP/IP Wiznet W5500 Ethernet chip. Use the Ethernet3.h library to write sketches which connect to the internet. Led outputs (full/half duplex, link, speed, active).10baset/100basetx ethernet phy embedded.supports power down mode. Supports WOL - wake on LAN. 8 independent sockets. Internal 32KB memory for serial buffers.
    14.99 $
  • RobotDyn - Relay Module 1 Channel, Operation 5V. VC - 10A 110VAC/250VAC/60VDC for Arduino Relay, arduino Relay 1 Channel, arduino Relay Module high Current
    PERFECT USE FOR DOMESTIC APPLIACES: office machine, audio, equipment, automobile, etc. (Remote control TV receiver, monitor display, Audio Raspberry Pi equipment high rushing current use application). DIRECT CONTROL WITH: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic. ADDED IN OPTOCOUPLER: .The microcontroller doesn’t have a physical connection with the relay, it’s more efficient to use LED lights. MICROCONTROLLER FRIENDLY: To save your microcontroller from a high voltage for VAC/VDC use the LED light of the Optocoupler IC to activate the relay. TCHNOLOGICAL SPECS: Equipped with high-current relay: AC250V/110V - 10A ; DC60V 10A. For control of module need power 5V and logic operation 3.3V/5V.
    4.59 $