Secret revealed: Arduino programming on ipad | Test & Rating

  • HiLetgo UNO R3 WiFi ATmega328P + WiFi + ESP8266 NodeMCU 32MB Memory USB-TTL CH340G for Arduino with USB Cable 2.4G WiFi Antenna
    UNO R3 WIFI ATmega328P + WiFi +ESP8266 NodeMCU 32MB Memory Integrated with ESP8266 WIFI, 32MB Memory Supply Voltage: 6~9V; MCU: ATmega328; USB Driver: CH340G
  • HiLetgo BadUsb Beetle Bad USB Microcontroller ATMEGA32U4 Development Board Virtual Keyboard for Arduino Leonardo R3 DC 5V 16MHz
    Microcontroller: ATmega32u4 Clock Speed: 16 MHz Operating Voltage: 5V DC Digital I/O Pins: 10 PWM Channels: 4
  • DAOKI 2PCS Digispark Kickstarter ATTINY85 Micro USB Development Board for Arduino with Dupont Cables
    Support for the Arduino IDE 1.0+ (OSX/Win/Linux). Power via USB or External Source - 5v or 7-35v (automatic selection) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB) Package Included:2 x Digispark Kickstarter ATTINY85, 1 x 11.8" Male-Male Dupont Cables 18 PIN
  • DAOKI LCD Keypad Shield LCD1602 Expansion Board Module Display for Arduino UNO R3 AMEGA2560 Nano Raspberry Pi with Dupont Cable
    【Compatibility】This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove, UNO, MEGA1280, MEGA2560 board. 【4 Bit LCD Library】 【V3 design】Pins out for easy connecting 【Blue Backlight】With white words, adjustable backlighting. 【Application】Keypad for menu selection and user interface programming.
    5.99 $
  • A Set AVR ISP USBtinyISP Programmer for Arduino Bootloader USB Download Interface
    ISP connector: 6-pin and 10-pin. size: 28.8mm × 61.6mm. power supply options: external power supply and USB power supply (if using an external power supply chip set ISP10 near yellow jumper cap removed) For the Arduino, USB power supply, which can provide direct power to, open the IDE, after choosing the Bord need to download the hardware name, in the Burn Bootloader choose USBtinyISP, start downloading bootlaoder, then download is completed within 1-2 minutes. The download cable to connect the supplied 6 pin connector, can be used as an addition to the download cable for Arduino, but also suitable for downloading most of the AVR program.
    10.99 $
  • Emakefun BLE Nano for Arduino with Wireless BLE and Micro-USB Interface,TICC2540 Chip,Compatible to Arduino Nano V3.0
    Main chip for ATMEGA328P-MU QFN32 package, Burning the latest Bootloader (Arduino IDE 1.8.8), Download faster and more stable.Fully compatible with older versions. Combining common Nano board functions with CC2540 BLE functions, It is very convenient to be applied in various wireless connection application scenarios. The BLE chip is TI CC2540 BLE (SOC) chip.Maximum support 1Mbps air data transfer rate, stable performance.Communication distance can reach 30M in an open environment. PCB size is only 48mm*19mm.The pins are fully compatible with Nano V3.0. The main board has been welded and the pin row does not need to be welded by itself. Micro usb interface is adopted, which is more convenient to use.
    12.99 $
  • ALMOCN 2 Pcs Compatible with Nano V3.0 Board ATmega328P 5V 16MHz Micro Controller Board Module CH340G Chip with USB Cable for Arduino
    Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL. Using Atmel atmega328p-au MCU, support ISP download; support USB Download and Power. The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
    10.56 $
  • KOOBOOK 1Set USBTiny USBtinyISP AVR ISP Programmer for Arduino Bootloader USB Download Interface
    USBtinyISP is an ISP line download based on USB interface designed for AVR microcontrollers . It can be used to download programs for most AVR microcontrollers.The Arduino IDE is always compatible with the USBtinyISP download line, which is mainly used to download the bootloader. USB power supply, can provide direct power to the Arduino, open the Arduino IDE, after choosing the Bord need to download the hardware name, in the Burn Bootloader choose USBtinyISP, start downloading bootlaoder, then download is completed within 1-2 minutes. The download cable to connect the supplied 6 pin connector, can be used as an addition to the Arduino download cable, but also suitable for downloading most of the AVR program. power supply options: external power supply and USB power supply (if using an external power supply chip set ISP10 near yellow jumper cap removed) ISP connector: 6-pin and 10-pin,size: 28.8mm × 61.6mm.
    9.99 $
  • KEYESTUDIO V4.0 Development Board ATmega328P for Arduino UNO R3 with USB Cable
    It’s a microcontroller board based on the ATmega328P and updated with CP2102 USB serial chip, fully compatible with arduino. 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP headers and a reset button. This microcontroller can be used by connecting it to a computer with a USB cable or power it with an AC to DC adapter. Also, it comes with the USB cable. BEAUTIFUL LOOK & PACKAGING: cool yellow-black design which is a departure from the standard, dull, black boards, the yellow silk screen on black mask make it easy to read the pin labels FCC and CE CERTIFICATION:This component works as a great alternative to the Arduino with no sacrifice made to its performance.
  • HiLetgo 51 AVR ATMEGA8 Programmer USBasp USB ISP 10 Pin USB Programmer 3.3V/5V with Cable
    Main Chip:ATMega8A-AU.Support AVR and ASP chip.Support AT89S51/52 microcontroller. The output port is an ATMEL standard port. With overcurrent protection.Automatic speed control.With power and write indicator lamp.With USB power and target board support target voltage 5V, can choose by jumper cap connection. Autospeed autofocus firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed, to achieve automatic speed control. Reserve MOSI, MISO,RET,SCK,VCC,GND. 6pin interface, user-friendly interface to connect the target board. Reserved programming interface, the user can upgrade the download firmware.