Secret revealed: 3d printing course syllabus | Last places

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black
    Accuracy & Consistency, Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all Neat Spool & Premium Quality, The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely Clog-Free & Bubble-Free, Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Mega, Chiron, Monoprice FlashForge and more Filament Installation, 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
  • FENGWANGLI 4 Pieces 3D Printer Glue Sticks Adhesive for Hot Bed PLA Glass ABS PETG CPE and More
    ▌Compatibility: Perfect for all 3D Printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc. ▌Easy to Use : You just need to twist it up, spread on an active printing area only, no need to cover the whole surface ▌Easy to Clean: With water soluble formula, you can just clean it with water after drying ▌Multi-function: Not only for 3D Printing, but also for arts and crafts, school projects, and more ▌Long-lasting: Last for 100+ average prints
  • Authentic Creality 1M PTFE Tube 3D Printer Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/3 Pro / 5 / Cr-10 / Cr10 Pro / Cr6 / Cr10s / V2 Works Well with PLA, PETG Capricorn Replacement
    We guarantee the quality of the product to be flawless when paired with Creality stock extruders and hotend, with the same or better result than Capricorn tube while costing half of the price. Made for the Ender 3, Ender 3 pro, Ender 3 Max, Cr-10, Cr10s, Cr10 v2, Ender 5, Anycubic i3, or any other Bowden Drive based 3d printers. Not only that, the part has been tested by 3DEGOS, a California-based distributor of Creality products and manufactured by Creality, ensuring the best experience all around. Precision PTFE tube made by Creality for Creality 3D printers but you can use it with any Bowden style extruder for the smoothest extrusion. Featuring a 2mm Inner diameter and 4mm outer diameter. The quality of a Bowden style printer is hugely impacted by the tolerance and material of the PTFE tube, who would be better at creating the best tube for Creality products than Creality itself.
  • PETG 3D Printer Filament PETG Filament 1.75mm 1kg 2.2lb Spool, Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printers Pack of 1 (Clear)
    【Toughness Enhanced PETG Filaments】PETG filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding. meeting your demands for printing projects of functional parts with higher toughness. 【Clog-free & Bubble-Free】 Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PETG filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance. 【Wide Compatibility】 Recommended extrusion/nozzle temperature 200°C - 230°C (392°F - 446°F), hot bed 70°C (158°F ),Print Speed 30-90mm/s,Spool Diameter: 220mm(7.88 inch) - Spool Width:69mm( 2.72 inch) - Spool Hub Hole Diameter: 55mm(2.28 inch). 【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm,Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc.m. 【Risk-Free】We provide professional 3d printing technical guidance and perfect after-sales service. Within 24 hours response,,100% Satisfaction Guarantee.
    17.99 $
  • 3D Pen for Kids - Advanced 3D Printing 3D Pen/3D Printer ABS Filament, Educational STEM Toy for Boys & Girls
    ✔️ GREAT STARTER PACK: 1 x 3D printing pen 1 x Power Adapter 1 x USB cable 1 x English User Manual 1 x base 1 x drawing template 2 x finger protector 1 x Beautiful Gift Box x 50 Meter ABS Filament ✔️ PROFESSIONAL QUALITY: Speed: Adjustable Material: Plastic case cover High Temperature(high speed):210° Medium Temperature(medium speed):200° Low temperature(low speed):190° ✔️ STEM LEARNING AT HOME: As a tactile learning toy, the pen inspires creativity, design, planning, building and spatial understanding. Our most advanced 3D Printing Pen - designed for making accurate and creative 3d models and structures. The only limit is your imagination. (Above age 8 and adults) ✔️ DESIGNED FOR FUN: Spaceman design and simple LED interface give kids many options to play with for endless hours of fun. ✔️ BUY WITH CONFIDENCE: We’ve got your back with a 100% satisfaction guarantee. In case of any issues, simply reach out to us and we’ll do all we can to make it right. Click ‘Add to Cart’ now to get your 3D Pen with complete peace of mind!
    45.99 $
  • 3D Printer PETG Tube 3D Printer Extruder Aluminum Block Silicone Lid with Degausser Line for CR‑11 CR10S 3D Printer
    This product is a repair kit for CR‑11 CR10S 3D printer, which is very practical. Using high‑quality materials, it is very strong and can be used for a long time. These accessories are easy to install and disassemble and are very easy to use. The 3D printer accessories are very complete and very convenient to use. This 3D printer accessory is easy to assemble and has very good performance.
    17.99 $
  • PORO-Lay Mold-Lay 3D Printing Filament - 1.75 mm 0.75kg
    0.75kg / 0.55 lb of 1.75mm MOLDLAY filament Excellent for making mold negatives Prints at temperatures of 170 – 180° C Made in Germany
    74.95 $
  • Magigoo MPC2018 3D Printer Adhesive Glue, Reduces Warping for Polycarbonate Filament on Glass, PEI, Buildtak, Kapton, 50ml 1.69 fl. oz.
    WORKS ON POLYCARBONATE FILAMENTS: specifically built for polycarbonate filaments unlike many other products WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo PC welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo PC adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo PC is easily cleaned with water LONG LASTING: Magigoo last for 100+ average prints; Print and print and print some more. ODOURLESS AND SAFE: Magigoo is not flammable and safe to use
    22.27 $ 24.99 $ -11%
  • Stronghero3D PETG 3D Printer Filament 1.75mm Rainbow 1kg for Anet Creality Ender3 Prusa
    Stronghero3D PETG filament 1.75mm ,petg silk effect,multicolors, 7-10 meters colors transition, most reasonable price Increase flow to 110-125% instead of rising nozzle temp will get good result.Same quality as other high price PETG,tough, easy to print Printing Tip,hair spray for heat bed,first layer nozzle higher than PLA,print at low speed PETG raw material from Korean SK 2012,Print temp nozzle 230-250 degree, heat bed 50-75 degree,accuracy +/-0.05mm, net weight 1kg PETG net weight 1kg, petg rainbow,petg multicolours,shiny smooth surface
  • Silk Red Copper PLA Filament 1.75 mm 1KG 3D Printer Filament 2.2LBS Spool 3D Printing Materials Silky Shiny Shine Metal Copper Feeling HZST3D
    Silk Shiny Metal Red Copper Color: It Look Like Metal Copper Shine after 3D Printing,Print with Smooth Shiny Copper Surface Widely Compatible: It's Support Almost All FDM 3D Printers on Market,Stability Diameter Tolerance Good Performance: Tangle-Free,No Edge Warping,No Bubbles,Strong Toughness,High Gloss,Print Smooth 100% Warranty: Premium Quality Guarantee,Within 24 Hours Reply,100% Satisfaction Guarantee Silk Shiny Copper,1KG/Spool.