Responses: Conductive 3d printing | Complete Test

  • Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Conductive Black
    3mm diameter, 1kg net weight, ABS Filament Filament Roundness: +/- 0.07mm Filament Diameter: +/- 0.05mm Recommended Print Temperature: 230 - 240°C, depending on printer model Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer
  • Proto-pasta CDP11701 Electrically Conductive Carbon Loose Coil, PLA Composite 1.75 mm, 125g, Black
    High electrical conductivity of 15ohm-cm suitable for lighting led's, touch sensors and other electronics. Please Note that this is a loose coil and NOT on a spool Dark Black in color with good printing on PLA machines Processing is comparable to standard PLA. No heated bed required, but it may improve results. Process may be less consistent on smaller nozzles (< . 4mm) and/or Bowden Type machines We recommend printing this material at 220c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor
  • Proto-pasta CDP11705 Composite Conductive PLA, 1.75 mm 500 g, Black
    High electrical conductivity of 15ohm-cm suitable for lighting LEDs, touch sensors and other electronics. Comes on fully corrugated recyclable spool with standard dimension Dark Black in color with good printing on PLA machines Processing is comparable to standard PLA. No heated bed required, but it may improve results. Process may be less consistent on smaller nozzles (<4mm) and/or Bowden-type machines We recommend printing this material at 220c-230c using a 4 mm or larger nozzle. Please note that this filament is more brittle than normal PLA and requires more careful handling to prevent breakage Designed and manufactured in the USA with quality and as top priorities. USA-sourced packaging and labor
  • TCPoly Thermally Conductive Ice9 Nylon 3D Printing Filament (1.75, 500)
    The filament is electrically non-insulating, and has ESD and EMI shielding capabilities and a thermal conductivity of 4 W/m-K in the print direction (20X HIGHER THAN STANDARD NYLON). This filament is ideal for 3D printing heat sinks, heat exchangers, thermal management components and even mold tooling or any other applications requiring high thermal conductivity, stiffness and temperature stability. Ice9 Rigid works well with most standard FDM printers (with nozzles that can achieve at least 265°C print temperature). TCPoly products are proudly made in the USA.
    79.99 $
  • Proto-pasta CDP12805 Composite Conductive PLA, 2.85 mm 500 g,Black
    High electrical conductivity of 15ohm-cm suitable for lighting LEDs, touch sensors, and other electronics. Comes on fully corrugated recyclable spool with standard dimensions Dark Black in color with good printing on PLA machines Processing is comparable to standard PLA. No heated bed required, but it may improve results. Process may be less consistent on smaller nozzles (<4mm) and/or Bowden-type machines We recommend printing this material at 220c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breakage Designed and manufactured in the USA with quality and customer service as top priorities. USA-sourced packaging and labor
    44.05 $ 47.22 $ -7%
  • TCPoly Thermally Conductive Ice9 Flex 3D Printing Filalment (1.75, 500g)
    Ice9 Flex is a semi-flexible TPE based filament This filament is non electrically insulating and has a thermal conductivity of 8 W/m-K in the print direction This filament is ideal for heat sinks, liquid cooling, and the most demanding thermal applications Ice9 Flex works best with FDM printers that print flexible filaments
    69.99 $
  • 3D Printer Filament 1kg (2.2lbs), Conductive Pla Black 1.75mm, Used for 3D Printer and 3D Pen
    High purity: raw materials, non-doped waste, recycled materials. Will not block the head and will not cause insufficient extrusion. High precision: The wire diameter tolerance is controlled at +0.03mm, which is more favorable for printing effect. If it is not blocked, it will not cause insufficient extrusion. The effect is good: the molding is not warped, no air bubbles, the printing effect is good, smooth and delicate, and the color is accurate. Good quality: good tensile strength, ductility, and low shrinkage. High toughness, low weight, and environmental health. If you like him, buy it. The meaning of life is to do everything you like.
    69.99 $
  • Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Orange
    3mm diameter, 1kg net weight, ABS Filament Filament Roundness: +/- 0.07mm Filament Diameter: +/- 0.05mm Recommended Print Temperature: 230 - 240°C, depending on printer model Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer
    20.95 $
  • Proto-pasta CDP11720 Electrically Conductive Carbon Spool, PLA Composite 1.75 mm, 2 kg, Black
    High electrical conductivity of 15ohm-cm suitable for lighting lad's, touch sensors and other electronics Dark Black in color with good printing on PLA machines Processing is comparable to standard PLA. No heated bed required, but it may improve results. Process may be less consistent on smaller nozzles (&let; . 4mm) and/or Bowden Type machines We recommend printing this material at 220c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor
  • Boron Nitride Paste
    Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life. Retails in 5 cc syringes with luer lock fittings Stable to 1000 °C