Responses: 3d print not sticking to bed | Test & Rating

  • Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235MM
    ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design. EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models. SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate. UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
  • HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with 3M 9448A Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2,Ender-3 3D Printers
    The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with 3M 9448A adhesive on the back. The PEI comes pre applied. The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. The size of HICTOP glass bed is 235*235mm(9.25*9.25inch), it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2,Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro,CR-20, CR-20 Pro and similarly sized machines.
  • Ender 3 Build Surface, 3D Printer Heated Bed Cover 3D Printer Build Surface Platform for Ender 3/3X/3 Pro/5/Pro,Anet A8, 9.25“x9.25”(235x235mm) Square for 3D Printer DIY (Pack of 2)
    【PACK of 2】Our Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro Replacement 3D Printer build surfaces are 9.25" x 9.25" (235mm x 235mm) square, fully matches heated bed on many popular 3D printers,and also can cut to any small size you want. 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production. 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry. 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service.
  • 3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Heated Build Plates, 118ml, 4 fl oz
    THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill 90-DAY MANUFACTURER GUARANTEE - If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund
    24.95 $
  • Magigoo MO2016 All-in-One 3D Printer Adhesive Glue, Reduces Warping for ABS, PLA, PETG, Hips and TPU Filament on Glass, PEI, Buildtak, Kapton 50ml, 1.69 fl. oz.
    WORKS ON MULTIPLE FILAMENTS: works great for ABS, PLA, PETG, HIPS, and TPU WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo is easily cleaned with water LONG LASTING: Magigoo last for 100+ average prints; Print and print and print some more. Each application can be used multiple times ODOURLESS AND SAFE: Magigoo is not flammable and safe to use - be it in a closed room or educational workshop with kids"
    17.00 $ 19.95 $ -15%
  • Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
    Size: 235mm x 235mm. Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards. Compatible with ABS, PLA, HIPS and other filament. Single sheet design installs more quickly and with fewer bubbles than tape or films. Durable construction allows for multiple uses with either the same or different filament materials.
    13.99 $ 19.99 $ -30%
  • Nano Polymer Adhesive - Ultimate 3D Printing Bed & Build Plate Adhesion - No Mess, Non-Toxic, Works for PLA, ABS, PEI, PEEK, Nylon, PC and More. Easy Application, Easy to Clean!
    Keeps MANY different 3D Printing materials adhered to build plates -- glass, carbon, metals, and other surfaces work great! Works for PEEK, CFPEEK, PEI & PEI Blends, PPSU, PSU, PPS, CF Nylon, PA6, PA12, PETG, ABS, and more! Formulated and Manufactured in Costa Mesa, California, USA Created from Safe, Organic Compounds Larger Bottle than most other providers = more prints!
    49.00 $
  • Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version
    <b>Durable, rigid construction</b>; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings! Long knife with a <b>beveled front edge</b>; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying Stiff, <b>hardened stainless steel</b> blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them <b>Stylish and useful</b>; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts <b>Essential addition to your 3D Printer accessories</b>; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed
    12.95 $
  • 3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12" x 12" Square with Premium Adhesive for CR-10 / CR-10S 3D Printers 310X310MM (Pack of 4)
    【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet for CR-10,CR-10S are 12" x 12" (310mm x 310mm) square, fully matches heated bed on many popular 3D printers,and also can cut to any small size you want. 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production. 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry. 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service.
  • FYSETC 3D Printer Heated Bed Platform 200X200mm Flex Magnetic Bed Build Plate 2 in 1 with Adhesive Backing Build Surface for Maker Select Plus V2 Prusa i3 Vinci 1.0 Tarantula I3 Ultimate Printer
    3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 7.8"*7.8" Printer Bed. 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface. Please Kindly Note: remove the printing after the build surface is become cooler, or the surface will developed a crack. the plate is magnetic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS PETG filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent. Come in 2 in 1, please adjust the distance between the nozzle and the A surface, or the nozzle will destroy the build surface. What you get: 1 Pcs 7.8inch Magnetic build plate A+B