Method revealed: Arduino programming language for loop | Customer Evaluation

  • The Python Workshop: Learn to code in Python and kickstart your career in software development or data science
  • Atmel ARM Programming for Embedded Systems (Mazidi & Naimi ARM Series) (Volume 5)
  • ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant
    NEW IMPROVEMENT: Clear prints on the female header connector, more precise and easier to use the wire. The ELEGOO UNO R3 BOARD now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory. Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3) 100% compatible with the Arduino IDE and RoHS Compliant We have always cared about the customer experience and improve the product function details.
  • ELEGOO Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
    The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link. It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
    15.99 $
  • REXQualis Board Base on Arduino UNO R3 ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects
    REXQualis R3 Board is 100% compatible with the Arduino IDE. REXQualis R3 Board uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory. Control using ATMEL ATMEGA328P chip(the same with Arduino R3) Clear prints on the female header connector, more precise and easier to use the wire. Powered via the USB cable or power it with an AC-to-DC adapter or battery to.
    11.86 $
  • Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
    Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL. LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. Works the same as original Nano, runs perfectly on programming software. Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power. LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.
    14.99 $
  • XINGYHENG 5PCS MCP4725 Breakout Module I2C DAC Development Board 2.7V to 5.5V Supply Compatible Programming with EEPROM
    Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use. Package including: Include a set of MCP4725 Development Board. This version of the MCP4725 Breakout solves some of the board's problems, including IC packages, I2C pinouts, changing the overall board size to better suit your project, and some minor adjustments. High Power High Efficiency: The DAC allows you to send analog signals, such as sine waves, from a digital source such as the I2C interface on an Arduino microcontroller. Digital to analog converters are ideal for sound generation, musical instruments and many other creative projects. High reliability, strong vibration resistance, good electromechanical performance. Super structure: MCP4725 is a single channel 12 bit buffer voltage output DAC with non-volatile memory (EEPROM).The user can store configuration register bits (2-bit) and DAC input data (12-bit) into non-volatile EEPROM (14-bit) memory. The DAC can be configured to normal mode or power-saving off mode by setting the configuration register bit.The device can use a 2-wire I2C compatible serial interface and is powered by a single power source with a voltage range of 2.7v to 5.5v A wide range of applications: It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
    9.99 $
  • seeed studio Wio Terminal: ATSAMD51 Core with BLE 5.0 & Wi-Fi 2.4G/5G Dev Board ,Compatible with Raspberry Pi,Support Arduino, MicroPython, Designed for IOT Projects
    【Highly Integrated Design 】Here we bring you Wio Terminal, equipped with a 2.4'' LCD Screen, onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm), packed multiple functions in a 72 x 57 x 12mm tiny but stylish enclosure. Instead of being a single embedded functional module, Wio Terminal is a simple and tiny device to build I/O with the physical world. 【Powerful Processor and Reliable Wireless Connectivity】Wio Terminal is an ATSAMD51-based microcontroller with wireless connectivity supported by Realtek RTL8720DN. It runs at 120MHz (Boost up to 200MHz) and supports both Bluetooth (BLE4/5.0) and Wi-Fi (2.4G/5G), providing a more powerful IOT capability than ESP32. 【Compatible with Raspberry Pi and 300+ Grove Modules 】Wio Terminal is equipped with various peripherals, including two multifunctional Grove ports for Grove Ecosystem and 40 Raspberry Pi compatible GPIO pins for more add-ons. By connecting Wio Terminal to Raspberry Pi, you can start programming and collect environmental data directly, with no need for soldering or breadboards. Over 300 Grove modules are available on Seeed and waiting for you to explore! 【USB OTG Support】Accessible Devices(as USB-Host): Mouse, Keyboard, MIDI Devices, Xbox/PS Gaming Controllers, 3D Printers; Simulated Devices(as USB-Client): Mouse, Keyboard, MIDI Devices. 【Rich Software Support】 lots of software supportted by Wio Terminal, such as Arduino, MicroPython, ArduPy, AT Firmware, Visual Studio Code, CircuitPython (coming soon).
    33.99 $ 38.99 $ -13%
  • Seeed studio Wio Terminal Board Compatible with Arduino/MicroPython/Raspberry Pi, ATSAMD51 Core with Realtek RTL8720DN Bluetooth 5.0 & Dual Band Wi-Fi, Highly Integrated Design, FCC, CE Certification
    [Highly Integrated Design] Wio Terminal development board has a 2.4 inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, Light sensor, infrared Emitter (IR 940nm) , and more practical add-ons housed in a compact enclosure with built-in magnets & mounting holes [Powerful MCU&Reliable Wireless Connectivity] Microchip ATSAMD51P19 equipped with ARM Cortex-M4F core running at 120MHz. Wio Terminal has Realtek RTL8720DN, and supports dual band 2.4Ghz/5Ghz Wi-Fi, Bluetooth/ Bluetooth 5.0, etc. Wio Terminal board also has obtained FCC, CE certification [Raspberry Pi 40-pin Compatible] Wio Terminal Can be mounted to a Raspberry Pi as a slave device, Raspberry Pi's HAT can also be used with an adapter cable. And since it supports over 300 IoT Grove modules, you can start programming directly and collect environmental data without the need for soldering or breadboards. [USB OTG Support] OTG technology enables data transfer between devices without a host. It can be used as a USB host or USB client. Available Devices (USB Host): Mouse, Keyboard, MIDI Device, Xbox/PS Game Controller, 3D Printer; Device simulation (USB client): mouse, keyboard, MIDI device [Software Support] Wio Terminal supports Arduino, MicroPython, ArduPy, AT firmware, Visual Studio code, CircuitPython (coming soon), etc. Note: ArduPy is a combination of Arduino and MicroPython developed by Seeed studio. See the Wiki for details. (Https://wiki.seeedstudio.com/Wio-Terminal-ArduPy/)
  • GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
    With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned. GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna! If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.