Explanation: Mod 1 3d printer | Complete Test

  • Mosaic Palette+ for multi-material 3D printing on 1.75mm printers | PLA, PETG, colorful, soluble, flexible | No mods to printer | 1-hr setup & calibration | Free software
    Print multi-material and multi-color creations using 1 extruder. Palette+ splices together filament and feeds them to your printer in real time! Soluble: Print impossible overhangs with select soluble supports Flexible: Create functional, end-use products by combining PLA with a flexible TPU Colorful: Print objects in brilliant color using 4+ filaments Compatible with large majority of 1.75 printers: Type A, Robo, CR-10, RepRap*, Raise3D, CraftBot, MakerBot*, Monoprice*, Prusa, MakerGear, Flashforge Creator Pro, Dremel, Anet A8, & more
  • HICTOP Tenlog D3 pro 3D Printer IDEX Independent Dual Extruder 24V D3 Hero Direct Feed 11.8x11.8x13.8 inch(300x300x350mm) (Dual Extruder)
    Please do not update the firmware if you are not sure which one is right for you as they are several versions in the market, they do not compatible with each other Three Print Models Available: You can use your D3 HERO 3D PRINTER to pringting Two-Color/Duplicate/Mirror Model. The maximum print size is 300*300*350mm. Multi Printing Material Available: Our D3 Hero 3D Printer works on sorts of materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model) LCD Touch Screen: 4.3inch LCD display touch screen, easy to operate. This 2019 new upgrade type D3 HERO 3D PRINTER is an all-in-one machine, moving all components into a compact base under the printing bed. Save more space for you. After Sales Service: We provide 3 months warranty for extruder, 1 year for the main parts and life long tech support. Any problem welcome feel free to contact us, we will reply you within 24 hours: )
  • Official Creality CR 10S Pro FDM 3D Printer Silent Mother Board Creative Capricorn PTFE Dual Extruder Gears for Hobbyists Designers and Home Users
    All in control thanks to its steady printing and accurate filament feed rates with Capricorn PTFE and Dual Bondtech Extruder Gears. Fast heating thanks to its efficient MeanWell UL power supply, only 5 minutes to heating up the hotbed.  Resume printing let your prints can be resumed from the last layer if power off or filament lost, saving time and reducing waste. Large power 500W, Brand wide voltage power supply, 100V-240V can be used, no need to adjust, convenient and fast, which can achieve long-term stable printing. Quality guarantee: we produce with meticulous and enthusiasm, we are sure you will love it, if not we offer 45 days no questions money back.
  • Monoprice-113860 Maker Select 3D Printer v2 With Large Heated (200 x 200 x180 mm) Build Plate + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models, Black
    Includes Heated Build Plate, 2 Gb Micro Sd Card and Sample PLA Filament. Compatible softwares: Such as Cure, Repeater, or Simplify 3D, the Maker Select is compatible with Windows, Mac OS X, and Linux Large volume: The large 8 x 8 inches build plate and generous 7 inches vertical spacing means that you can print larger, more complex models. Note: Ensure that the nozzle temperature is set to the correct value for the type of material being printed. Check that the GCODE file is complete and not corrupted. Check the original model file. Heated build plate: The heated build plate allows you to print slower cooling materials, such as ABS and modified ABS, as well as PLA and PLA blends Micro SD card slot: Use a micro SD card to store sliced G Code files, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC. Printable Materials- ABS, PLA, XT Copolyester, PET, TPU, TPC, FPE, PVA, HIPS, Jelly, Foam, Felty. Max. Extruder Temp- 500°F (260°C)
    538.52 $
  • Monoprice Maker Select Plus 3D Printer With Large Heated (200 X 200 X 180 mm) Build Plate, LCD Touchscreen Display + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models
    Support for All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA. Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk Ready to Print include sample PLA filament and a MicroSD card with preinstalled models, Build area 7.9 x 7.9 x 7.1 inches, printer frame dimensions 15.7 x 16.1 x 15.7 inches Heated aluminum build plate nozzle cooling fan for printing all filament types. Complete kit with sample PLA filament, bed scraper, and MicroSD card with preloaded model files. Micro USB and MicroSD card connectivity. PC and Mac compatible. Compatible with Cura, Repetier, and other software.
    926.23 $
  • Creality BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality Ender 3/ Ender 3 Pro/Ender 5/Ender 5 Pro/CR -10/CR-10S4/S5/CR20 with 8 Bit V1.1.5 /V1.1.4 Mainboard 3D Printer
    Firmware Download:Please move to the Official Website to download the firmware and flash it at first.(If your mainboard is V1, use isp to flash of V1.1.4 or V1.1.5(8 bit) mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; if your mainboard is V2, use USB to flash,The circuit wiring of CR-10S,CR-10S4, CR-10S5, CR 20 are different from the manual). Widely Application:Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10 / CR-10S / CR 10S4 / CR 10S5 / CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR 10S Pro) Please flash the firmware first. Use the ISP cable or SD card to flash the firmware for V1 mainboard(1284P). Use USB cable to flash for V2 Mainboard(2560P). There are two different versions instruction for V1 and V2 mainboard. Easy to Use: BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore. Genuine High Quality Set :Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. Troubleshooting Guide: If your computer does not support Progisp please change another computer to try. If the usb cannot be recognized we suggest you to buy a USB to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
    52.88 $
  • Dikale PETG 3D Printer Filament 1.75mm No Tangle, Net Weight 2.2lbs per Spool (1kg), 2 Packs, Red and Blue
    NICE ADHENSION, NO TANGLE - Dikale PETG 3D printer filaments 1.75mm are no tangled. We supply you high purity with low shrinkage, superb layer bonding and nice arranged PETG filaments. It can provide you a smooth and stable printing experience. NO CLOG, NO BUBBLE, HIGH ACCURANCY - Dikale PETG filaments diameter: 1.75+/-0.04mm. Print speed: 30-70mm/s. Length: 325-335m/1099ft. Nozzle tempe:210-230°C. Heat Bed 55-75°C. Filament net weight: 1kg(2.2lbs). Item Weight: 1.3kg(2.8lbs). SAFE , COMPATIBLE - Dikale PETG filament is produced harmless to users and the environment. 1.75mm petg filament is suitable and compatible with most FDM 3D printer. Such as Creality Ender 3 , Ender 3 Pro, Monoprice Mini Delta 3D printers and more. STONGER DURABLE 3D PRINTER FILAMENT - Dikale PETG combines both advantage of PLA and ABS. It is as easy to use as PLA, but stronger and could sustain higher temperature. It is durable and resistant as ABS, but easier to mold and environment-friendly. TRUSTWORTHY MERCHANT - 30 Days Hassle Free Returns and 24-hour response service are friendly offered. We stand behind the quality of everything we sell. If you are not entirely happy, please send email to us , we will replace or refund your order.
    32.99 $
  • GEEETECH PLA 3D Printer Filament 1.75mm, Glow in The Dark Blue 1kg (2.2lbs) Spool
    【1】Vacuum Sealed Package:GEEETECH 3d filament is carefully vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams. 【2】High Precision +/- 0.03mm Tolerance: Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance approximately 330m of filament on each spool ease of use, minimal warping, no odor,no clogging, no bubbles 【3】Tangle Free& No Plugging: It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free GEEETECH 3D printer filament comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances 【4】Glow in the dark: Contains phosphorescent materials that glows in the dark after absorbing light energy. 【5】Money-back Warranty: GEEETECH provides money-back guarantee If you're not completely satisfied with the quality, contact us in time.
    25.99 $
  • Easy Print Orange PETG Filament 1.75mm 1KG 3D Printing Filament 2.2lbs Spool 3D Printer Materials CC3D Fit Most FDM Printer Orange Color
    New arrival PETG filament:Easy to print, Excellent layer adhesion Industrial Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament Universal compatibility with diverse FDM 3D printers in market. Eco-friendly and odor-free. Premium petg and cost-effective:our petg filaments deliver exceptional quality and reliability to meet your everyday needs in design and prototyping while in its cost-effective price. Print Suggestion:Tested for all filaments please print according to the print temperature we provide(230- 255℃).
  • PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,Silver
    ✔️【1KG (2.2LBS) SPOOL 】– Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Filament dimensional ✔️【Wide Compatibility & High Dimensional Accuracy】Geeetech filament are compatible with FDM 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm. ✔️【VACUUM PACKAGING】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle. ✔️【EASY-TO-USE, CLOG-FREE, BUBBLE-FREE 】– Recommended extrusion/nozzle temperature 180°C - 210°C (356°F - 410°F), hot bed 25°C - 60°C (77℉~ 140℉) . ✔️【100% Satisfaction Warranty 】GEEETECH provides 100% Satisfaction Guarantee and Premium Customer Services with 24 hours guaranteed reply. If you are not satisfied with this filament, please kindly contact us at ANY TIME.