Explanation: Arduino tutorial rfid rc522 | Test & Advice

  • HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
    The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
  • SunFounder RFID Kit Mifare RC522 RFID Reader Module with S50 White Card and Key Ring for Arduino Raspberry Pi
    The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip Easy to use, with pin header. The module can be directly loaded into the various reader molds. Applicable for the user who need to design or manufacture the RF card terminal. Module Interface: SPI, Data transfer rate: Maximum 10Mbit/s. Power Voltage : 3.3V,Operating frequency: 13.56MHz.
  • REXQualis Most Complete Starter Kit Base on Arduino MEGA 2560 w/Detailed Tutorial Compatible with Arduino IDE
    REXQualis complete starter kit base on Arduino MEGA 2560 comes with more than 200pcs components, 67 kinds of components and sensors module. LCD1602 Module,MPU-6050 Module and RC522 RFID Module come with pin header, Motors come with wires, not need to solder by yourself. Include High Quality Base Board base on Arduino MEGA 2560 100% compatible with Arduino IED. Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service. All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.
  • Qunqi 5Pcs RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring for Arduino Raspberry Pi
    Current :13-26mA / DC 3.3V,Idle Current :10-13mA / DC 3.3V Sleep current: 80uA,Peak current: 30mA,Data Transfer Rate: Max. 10Mbit / s Power Voltage : 3.3V,Operating frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Read Range: 0 ~ 60mm (mifare1 card),Module Interface SPI Parameters
    12.79 $
  • DaFuRui 5Pack RC522 RFID RF IC Card Sensor Module with S50 White Card and Key Ring Compatible for Arduino
    ★100% brand new and high quality RC522 RFID RF IC Card Sensor Module. ★This RFID-RC522 module is based on the Philips MF522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips. ★This module can be directly loaded into the various reader molds. ★Applicable for the users who need to design or manufacture the RF card terminal.The development of access controls, electronic door locks or terminals for the time recording. ★It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
    15.99 $
  • Stemedu RFID RC522 Module IC Card Reader Read RF Proximity Sensor, with S50 Blank Card, with Key Ring, for Arduino Raspberry Pi Nano NodeMCU(Pack of 2sets)
    🚩 Document link please contact us. 🚩 Supported card types: Compatible with Mifare1 S50/S70, Compatible with MIFARE Ultralight/Mifare Proand MIFARE DESFire 🚩 Power Voltage : 3.3V,Operating frequency: 13.56MHz, Data transfer rate: Maximum 10Mbit/s 🚩 What you will get: 2PCS RFID Module, 2PCS Blank Card, 2PCS Key Ring, 40pin Male to Female Jumper Wire and 4PCS Pins 🚩 How to email us? Please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button), in the new page, click “Ask a question” to email us
    9.99 $
  • Organizer 3pcs RFID Kit Mifare RC522 RFID Reader Module with S50 White Card and Key Ring for Arduino Raspberry Pi
    The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip Applicable for the user who need to design or manufacture the RF card terminal. Module Interface: SPI, Data transfer rate: Maximum 10Mbit/s. Power Voltage : 3.3V,Operating frequency: 13.56MHz. Organizer RFID Kit, MFRC RC522 RFID-RC522 RF IC Card Reader Sensor Module S50 13.56MHz RFID Smart Card RFID Chip Key Ring Mifare Arduino Raspberry Pi
    9.98 $
  • KINCREA Mega 2560 Project The Most Complete Ultimate Starter Kit Compatible with ArduinoIDE w/Tutorial, MEGA 2560 R3 Controller Board, LCD 1602, Servo, Stepper Motor (242 Items)
    🌳This is the most complete with ArduinoIDE Mega2560 starter kit with FREE tutorials, just follow our tutorials and you will come to start with ArduinoIDE. 🌳MEGA 2560 controller board and expansion board are perfect for ArduinoIDE project with excellent product finish. 5V relay module make it easier to connect and control the high voltage. 🌳Total 242 items with clear list are packaged in a nice plastic box, meet your demands for your different projects either it is simple or complex. 🌳This kit can be used with Mac,PC and Linux. The way to install driver can be referred to the product description. 🌳A clear listing for components can be viewed by clicking the picture or in the product description. Cd included detailed tutorials, you can also contact us by email to get documents.
    56.99 $
  • IZOKEE Card Reader Module for RFID RC522 with S50 13.56MHz Smart Card Chip Key Ring for Arduino for Raspberry Pi (1 Set)
    This Card Reader module is based on the MF522-AN board and is delivered together with an S50 card, 6 blue key Ring and two matching pin strips. It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording. It is compatible with Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire. This module can be directly loaded into the various reader molds. It is compatible with Arduino, Raspberry Pi and micro-controller. The module uses a voltage of 3.3V. It can be connected communication with user's any CPU main-board through several lines of SPI interface; it can ensure stable and reliable work, and reader distance.
  • DAOKI RFID Module RC522 Kits MFRC RC522 RFID Reader Module with S50 13.56MHz RFID White Card and Key Card for Mifare Arduino Raspberry Pi
    The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip Easy to use, with pin header. The module can be directly loaded into the various reader molds. Applicable for the user who need to design or manufacture the RF card terminal. Module Interface: SPI, Data transfer rate: Maximum 10Mbit/s. Power Voltage : 3.3V,Operating frequency: 13.56MHz.