Explanation: Afinia 3d printer | Test & Rating

  • Octave 1.75mm Blue ABS Filament 1kg (2.2lbs) Spool for Reprap, MakerBot, Afinia and UP! 3D Printer
    STRONG AND DURABLE 3D PRINTS - ABS is one of the plastic filament materials most commonly used for 3D printing. It produces durable 3D printed models that have higher resistance to heat and are less brittle than those printed with some other popular 3D printing materials (like PLA) HIGH QUALITY ABS FILAMENT - Octave engineered its ABS filament to work at a wide extruder temperature range, and manufactures it to tight tolerances using quality materials, so it works smoothly and consistently PROFESSIONAL 3D PRINTED MODELS - Models printed with Octave ABS filament are tougher, more durable, and more heat resistant than models 3D printed with PLA, and have more in common with mass-produced plastic models and parts. Octave ABS can be sanded, glued, and painted, as well as post processed in an acetone vapor bath for a smoother, glossy finish. WIDE COMPATIBILITY - Octave ABS filament prints at temperatures from 210-250℃, so it works well with most 3D printers that support 1.75mm ABS filament, like Raise3D, ZMorph, Fusion3, Afinia, FlashForge, UP, CraftBot, and others (80-120℃ heated print bed strongly recommended, external spool holder may be required—always check your printers’ specifications). SPECIFICATIONS - Color = blue, Material = ABS, Filament diameter = 1.75mm, Print temperature = 210-250°C, Recommended print bed temperature = 80-120℃, Spool capacity = 1kg (2.2lb), Filament length = 400m (approximate), Reel diameter = 20cm (7.875"), Reel width = 6.5cm (2.56"), Hub diameter = 5.2cm (2.04")
  • BALITENSEN 140mm x 140mm x 3mm Borosilicate Glass Plate for Afinia and UP 3D Printer Boro Glass Bed
    100% borosilicate glass.
  • GO-3D PRINT 140mm x 140mm Borosilicate Glass Plate/Bed w/Flat Polished Edge for Afinia and UP! 3D Printer
    Size: 140mm x 140mm x 3mm To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat Polished Edge for safe to handle Designed by GO-3D Print in California
  • 3D PETG Printer Filament Transparent Red, PETG 1kg(2.2lbs), Dimensional Accuracy 1.75mm, 0.02mm, 1KG Spool Transparent Filament
    1 KG (2.20 lbs) PETG 3D Printer Filament ── Transparent Red, Dimensional Accuracy 1.75mm +/- 0.02mm, Printing temperature: 220 - 240°C, Length Approx. 325m. PETG Filament is great alternative to ABS or PLA filaments for light and translucent items. Enhanced PETG Filament 1.75 engineered to reduce jams for reliable, hassle-free printing. Great layer adhesion, chemical resistance including acids and water. Our PETG Transparent offers excellent clarity, light transmission (in the translucent colors) and high gloss. PETG is also a food contact approved material, is BPA free and prints without any odor or smell! Our PETG filament is extremely durable, solid and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is used for printing mechanical products or in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements. Compatible with ALL FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
    19.99 $
  • CCTREE 1.75mm ST-PLA (PLA+) 3D Printer Filament Accuracy +/- 0.03 mm 1kg Spool (2.2lbs) for Creality Ender 3/Ender 3 Pro,CR-10S/CR-10S Pro, Grey
    ♥CCTREE ST-PLA (PLA Plus version): is a Upgrade Non brittle PLA with real good strength and impact resistance,High rigidity and Good Glossiness ♥ NaturalWorks virgin Material 100% ENVIRONMENTALLY FRIENDLY,CCTREE Filament comply with the RoHS and Reach Certificate ♥CCTREE ST-PLA Good Tolerance : You will have Pretty good experience during Printing with useing CCTREE Filament with Tolerance ± 0.03mm ♥ Package:Vacuumed sealed with Desiccant and packed with really hard Brown Box.This allows your filament keep optimal storage before use it. ♥CCTREE filament Perfect Compatible with Creality Ender 3 ,FlashForgeMonoprice,XYZprinting,ALUNAR and other desktop 3D printers which use 1.75MM Filament
    22.99 $
  • Dremel Digilab 3D20 3D Printer, Idea Builder for Brand New Hobbyists and Tinkerers - 3D20-01
    Countless hours of high quality printing with the most reliable low-cost 3D printer Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9 Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval Compatible with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F
    679.00 $
  • BIBO 3D Printer Dual Extruder Sturdy Frame WiFi Touch Screen Cut Printing Time in Half Filament Detect Demountable Glass Bed
    Full Color Touch Screen: with no threshold,which is more friendly and easier operation Dual Extruder: allows you print the object in two color and print the dissolvable filament for printing support material Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing WIFI Control: the included networking feature permits you to control the print via a phone or PC Copy printing: dual extruders can print two same objects at one time, cut your printing time at least in HALF
    749.00 $ 839.00 $ -11%
  • Dremel DigiLab 3D45 Award Winning 3D Printer w/Filament, PC & MAC OS, Chromebook, iPad Compatible, Network-Friendly, Built-in HD Camera, Heated Build Plate, Nylon, ECO ABS, PETG, PLA Print Capability
    AWARD WINNING 3D PRINTER: 2018-2020 PCMag Editors' Choice Award. 2019 All3DP Best 3D Printer for Schools Award RELIABLE AND PRECISE PRINTING: 50 Micron layers (1/20th mm). Internally tested by Bosch (+800 hours) for safety and performance and 3rd party tested by UL WINDOWS, MACOS, CHROMEBOOK AND IPAD COMPATIBLE with cloud-based software included NETWORK FRIENDLY with Wi-Fi, Ethernet and USB connectivity. Also equipped with static IP and Proxy for quick and easy network set-up WORLD-CLASS LIFETIME DREMEL CUSTOMER SUPPORT located in Racine, WI. HEATED BUILD PLATE (10”X6”X6.7”) allows you to use PLA, PETG, ECO-ABS and Nylon filaments AUTOMATED 9-POINT LEVELING SYSTEM and built-in auto-levelling sensor detects and account for discrepancies for more successful printing BUILT-IN HD CAMERA allows monitoring prints from anywhere when using the Cloud software
    1,666.18 $ 1,899.00 $ -12%
  • Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function 220x220x250mm
    Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs. Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well. Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable. Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃. Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm
    REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling. SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes. RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages. SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.