Expert says: Arduino tutorial motor shield | Review & Prices

  • kuman CNC Shield Expansion Board V3.0 +UNO R3 Board + A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75 (CNC Shield+UNO R3+Stepper Motor) (K75-CNC-UK), Red Blue
    Latest CNC Shield Version 3.0 board. MCU: ATmega328, USB interface: ATmega16U2. PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC. 2 x End stops for each axis (6 in total). 4Pcs A4988 Stepper Motor Driver with radiator.
  • Arduino Engineering Kit REV2
  • Ximimark L298P Shield R3 DC Motor Driver Module 2A H-Bridge 2 Way for Arduino UNO 2560 (1 Pcs)
    The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. Motor controller L298P, Drives 2 DC motors or 1 stepper motor Package: 1pcs Motor Driver Module If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
  • ELEGOO Mega 2560 R3 Project Starter Kit Compatible with Arduino IDE MEGA2560 - Including 16 Tutorials CD
    The cheapest and most basic MEGA2560 R3 kit for the beginner. Free PDF tutorial including project introduction and code will be provided in CD, you can save a lot of time searching them. With the newest MEGA2560 R3 development board + USB Cable and all the basic components. Nice package in the box with clear listing and CD.
    34.99 $
  • SainSmart UNO R3 MEGA328P-AU SMD Starter Kit with 16 Basic Arduino Tutorial Projects for Beginner
    The kit has more than 16 projects for the beginners. This is the new SainSmart UNO R3 Starter Kit, developed specially for those beginners who are interested in Arduino. A complete set of Arduino"s most common and useful electronic components. What"s more. The latest SainSmart UNO R3 development board is included.
    38.99 $
  • Emakefun TB6612FNG Motor Drive Board, 8 Servo Motor Drive for Arduino R3 and MEGA2560 Boards Starter Robot Car Kit,Support Scratch Library
    Emakefun PS2X & Motor Drive Board V4.0 based on TB6612 MOSFET driver, fully compatible with Arduino R3 and MEGA2560 boards, The product adopts an upgraded DC-DC power supply module, supports up to 3A current output,TB6612 motor drives 1.2A per output current with a maximum peak of 2.5A. It is easy to drive 4 DC motors or 2 stepper motors, 2 encoder motors, 8 servo motors, two of which can use external power supply. With 1 PS2X port, 1 NRF24L01+ module port, 1 ultrasonic module port,1 Bluetooth & WiFi module port, 1 IIC port,Extend 2 RGB LED,1 Buzzer,1 IR recriver. Support mblock, mblock5, mixedly, scratch3.0 graphical driver library.We provide the Scratch development library, development instructions, driver board schematics and module test programs, please download the tutorial from this link: github.com/emakefun/MotorDriverBoard
    12.99 $
  • OSOYOO Omni-directinal Mecanum Wheels Robot Car Kit for Arduino Mega2560|Metal Chassis DC Speed Encoder Motor Robotic DIY|STEM Remote Controlled Educational | Mechanical DIY Coding for Teens Adult
    OMNI WHEELS ROBOT CAR: 4WD Omni-directional wheels and DC Speed Encoder Motor robotic car uses the latest mecanum wheels for omnidirectional movement and allow your robotics to not only travel forward and backward, but also sideways and diagonally((Left/Right Parallel Shift,Forward/Backward,Upper Left/Right Diagonal shift,Lower Right/Left Diagonal Shift).Perfect for tight spaces. SIMPLE, INTELLIGENT, FUN PROJECT: Control your OSOYOO Omni Wheels Robot Car by Android and iOS App, allowing many additional functions such as imitation driving and WiFi controlled auto driving.This intelligent, new technology supports various projects such as line tracking, obstacle avoidance and gravity sensing control. THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 3-Points Line Tracking Modules, Obstacle Sensors, Voltage Meter, Acrylic Car Chassis, 4 Motors 4 Mecanum Wheels, 18650 Battery Box. MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET: Basic Tutorial with Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance — Practice and Become a Master!
    119.00 $
  • seeed studio CAN-Bus Shield V2 Compatible with Arduino
    CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks for CAN-BUS, makers are able to hack their cars more conveniently. The CAN-BUS Shield V2 still uses MCP2515 as CAN-BUS controller and MCP2551 as CAN transceiver. Despite of that, there are really many updates. First and most importantly, OBD-II or CAN standard pinout can be selected by switching jumpers on DB9 interface, the default pinout is OBD-II. Secondly we add a TF card slot for data storage and the CS pin can be either set to D4 or D5. The INT pin can also be set to D2 or D3 by switching jumpers on the back of the shield. CAN BUS Shield Work well with Arduino UNO (ATmega328), Arduino Mega (ATmega1280/2560) as well as Arduino Leonardo (ATmega32U4) and LinkIt One.
    29.90 $
  • Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
    New version 2.3! Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project. Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
  • 3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display
    2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product. Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)