Expert says: Arduino 2wd smart robot car kit | Coupon code

  • The perseids DIY Robot Smart Car Chassis Kit with Speed Encoder, 2 Wheels and Battery Box (2 Wheels)
    Intelligent Tracing Robot car chassis, high degree of freedom, ideal for DIY subject, science education, development of hobbies and interest, educational toys for kids. Mechanical structure is simple, 2 DC gear motors, flexible turning, eco-friendly chassis is stability and very easy to expand. No add-ins is very convenient, the entire system is highly integrated. Can be used to measure distance and speed. Educational learning kit for beginners (kids) to get hands-on experience about Robotics & Can extend electronics system like Raspberry Pi, or Arduino etc. Realizing functions of tracing, obstacle avoidance, distance testing, speed testing, and wireless remote control. Size: 21 x 10cm (LxW). Wheel size: 6 x 2.7cm (Dia.xH). Motor power supply is 3V ~ 6V. All the parameter above is tested without load. Note: The kit does not include any module, please purchase in needs.
  • VKmaker New Avoidance Tracking Motor Smart Robot Car Chassis Kit Speed Encoder Battery Box 2WD Ultrasonic Module with Tutorial CD
    mechanical structure is simple and very easy to install. The package will come with tutorial CD and test code. car with four on the 5th battery compartment, convenient to the entire system power supply. At the same time equipped with a switch, easy start-stop system. Without additional very convenient, so that the whole system is highly integrated car shop with L298N driver module, four tracking module, as well as 51 control unit seamless, simple and good-looking components of the system! car comes with 20 wire tachometer yards, with photoelectric gun shop can be quickly formed a gun systems. You can speed, distance, composed of closed-loop systems.
  • diymore 2WD Smart Robot Car Chassis Kit with 2 Motor (1:48) Speed Encoder Battery Box for Arduino UNO Project
    This car is the tachometer encoder. Mechanical structure is simple, it is easy to install. No add-ins is very convenient, the entire system highly integrated. Can be used to measure distance, speed. 4 on the 5th battery compartment, convenient power throughout the system in a switch, while starting and stopping. Note: Motor power supply is 3V~6V. All the parameter above is tested without load.
  • Mixse 2WD Smart Robot Tracking Car Chassis Starter Kit Speed Encoder Compatible for Arduino UNO R3 DIY Electric ISP Program Project
    Made of high quality material PCB,No add-ins is very convenient to install, the entire system is highly integrated.Open your imagination, enjoy assembling pleasure Mechanical structure is simple, 2 DC TT gear motors, 2 universal wheel,flexible turning, eco-friendly chassis is stability and very easy to expand. TT DC Motor, plastic material,strong magnetic,EMC, it has an anti-interference ability.Operating voltage: DC 3V-12V(Recommended operating voltage: 6V- 8V),Maximum torque: 800gf cm min (3V) ; No-load speed: 1:48 The Smart robot car chassis board is round and diameter 14cm, double chassis, steady & easy to expand,more space, can add some micro-controller and sensor modules, and program it Can extend electronics system like raspberry pi arduino UNO r3 etc. to realize function of tracing, obstacle avoidance, distance testing, speed testing, IR remote control
    13.90 $
  • LAFVIN Smart Robot Car 2WD Chassis Kit with Ultrasonic Module R3 Board,Remote Compatible with Arduino IDE DIY Kit
    This kit with tutorial user manual containing more than 10 lessons,code,Libraries,Installation method and so on. LAFVIN Smart Robot Car 2WD Chassis Kit is simple and very easy to install. You will learn obstacle avoidance, IR remote control. This kit includes R3 Board HC-SR04 Ultrasonic Sensor,V5.0 extension board,Line tracking module etc. It is an integration solution for robotics learning and made for Arduino education.
    27.99 $
  • Ardokit Smart Robot Car Chassis Kit Speed Encoder Battery Box For Arduino
    Mechanical structure is simple, very easy to install. Comes with tachometer encoder. Can be used with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control. With four on the 5th battery compartment , convenient to the entire system power supply. At the same time with a switch for start and stop. No add-on is very convenient , the whole system is highly integrated Ideal for DIY, It is an integration solution for robotics learning. An educational kit for beginners to get hands-on experience about programming, electronics assembling and robotics knowledge.
    13.88 $
  • 4 Wheel 2 Layer Robot Smart Car Chassis Kits with Speed Encoder for Arduino DIY (Yellow)
    <p>Four wheels smart robot car with independent DC motor,independently drivable. More flexible control.<br></p> <p>Smart robot car chassis kit for double chassis,more space,more mounting holes for most sensors andmodules. Car chassis easy to install speed measurement module, tracking module,Obstacle Avoidance Module, radar module, etc.</p> <p> It is an integration solution for robotics learning and made for education.Car chassises easy to install,with installation instructions.</p> <p>Smart robot car chassises are  good products for DIY,Educational kit,Suitable for robot lovers, car lovers, etc.</p> <p>Smart robot car chassis  kit can be used with raspberry pior arduino,etc.</p>
    18.99 $
  • LAFVIN Smart Robot Car Kit Include Ultrasonic Sensor, Bluetooth Module,R3 Board Compatible with Arduino IDE with Tutorial
    The tutorial include codes,labraries and lessons.It will teach every users how to assembly the smart robot car kit and use R3 controller board, sensors and modules. LAFVIN robotic car learning kit is designed for beginners to learn Arduino programming and get hands-on experience on robot design and assembly This kit includes R3 Board HC-SR04 Ultrasonic Sensor,V5.0 extension board,Line tracking module,Bluetooth module,etc. You will learn the Line Tracking, Ultraviolet Obstacle Avoidance, IR Remote Control, Bluetooth Remote Control of Smart Car, you can also extend other functions on this robot platform. This car really excellent and safe to be a perfect gift for your children and friend.
    41.99 $
  • XiaoR Geek Smart Robot Car Chassis Kit Aluminum Alloy Big Tank Chassis with 2WD Motors for Arduino/Raspberry Pi DIY Remote Control Robot Car Toys - Free Tools (Black)
    【High strength robot tank base】This is an agile tracked chassis, low noise and easy to control, which is a good partner for you to learning robotics.The robot chassis uses high strength aluminum alloy which makes it extremely solid and durable. 【Nice damping effect】The track is made of engineering plastic that basically assured the good elasticity, excellent damping effect and large road grip of the product. What’ s more, The high speed motors and premium tracks also allows it to move swiftly everywhere. 【More interesting functions】 XiaoR GEEK Tank Mobile Platform is fully compatible with most popular controllers in the market such as Jetson Nano, Raspberry Pi, UNO R3, Mega 2560 and so on. Users are able to add various sensors, servos, turntables and controllers with multiple mounting holes on the robot platform. 【Develop DIY ability】The tracked chassis is unassembled, you need to get it done by yourself and enjoy the fun of DIY. What’s more, we have step by step instructions for you.
  • 2WD Robot Smart Car Kit Tracking Motor Chassis Starter Kits Remote Control Car Board Compatible with Arduino Projects UNO Raspberry Pi R3 DIY
    2WD robot smart car chassis board Kits, it can use with other electronics devices system like arduino/raspberry Pi/UNO R3 etc ,to learn of obstacle avoidance tracking, distance testing, speed testing or ir wireless remote control Smart robot car 2WD chassis kit ,mechanical structure is simple, very easy to install. 2pcs DC 1:48 gear TT motors, 1pcs universal wheel ,flexible turning, eco- friendly chassis is stability and very easy to expand This 2WD chassis board kit with battery box , convenient power supply to the entire system . at the same time with a switch for start and stop. the whole system is highly integrated.Ideal for DIY, It is an integration solution for robotics learning.compatible use to Arduino UNO This 2WD tracing robot smart car chassis starter kits is the perfect beginner tool for electronic enthusiast or students to learn the basics of engineering and robotics, good for DIY subject, science education, development of hobbies and interes,so as to get hands-on experience about robotics TT DC Motor power supply is 3V - 6V, this tracking motor smart robot car kits NOT include any module