Discover: Alunar 3d printer | Discount code

  • ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)
    5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer) Nozzle Throat Tube: Material - Stainless Steel; Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm Hex Key Wrench: Diameter - 2mm and 3mm; Shape - Hex Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8
  • Creality CR-10 Mini 3D Printer DIY I3 Kit Resume Print Aluminum Frame Large Heated Bed 300x220x300mm
    Easy and Fast Assembly: This 3D printer ALUNAR Creality CR-10 Mini comes with only 3 sets; it takes about 10 minutes to build it up. Resume Prints: ALUNAR CR-10 Mini can resume prints even after a power outage or lapse occurs. Large Printing Size: This DIY 3D Printer with max printing size of 300X220X300mm.No longer you will be limited to small objects. Durable and Strong Structure: Aluminum framework and I3 instruction, imported linear navigation with low friction. Industrial-grade PCB main control board make this 3D printer durable and strong. Neat Looking, Safe and Easy Wiring: LCD, main control board and power supply are completed covered in the box, it makes the 3D printer very neat and tidy. All the cables are integrated with female sockets to the male pins; it’s so easy to connect.
  • Diyeeni 3D Printer Extruder Heating Aluminum Block Kit with 10pcs Line Pipe (30mm) and 10pcs 0.4mm Nozzle, Alternative Hot Ends for Anet A8, MK8, i3, Alunar M508, CR7, V2
    The use of a large number of MK8 brass extruder nozzles for 1.75mm filament provides a simple way to upgrade the hot end. 12V / 40W high temperature resistant heating rod (line length 1m / 39.4 in), working temperature range: 0 ~ + 280°C (0 ~ + 538°F) . Heating block is used for fixing screw: M6 and M3. Suitable for 1.75mm PLA ABS 3D printer. By improving the internal surface finish, the extrusion force is reduced and the reliability of retraction is improved. The size of aluminum heater block is 20 * 20 * 10mm, with the necessary screw. Perfect match with daily filaments, such as PLA and ABS. The 4.30 mm length extruder and 1.75mm tube are made of aluminum. It is durable and stable.
  • ANYCUBIC MEGA S FDM 3D Printer with Updated Extruder, All Metal Frame, Free Test Filament, DIY Printer Works with TPU/PLA/ABS Print Size 8.27(L) x 8.27(W) x 8.07(H) inches
    ✔Powerful Extruder -- The newer high-strength extruder has a stable rotation speed, avoids uneven output, greatly reduces the risk of nozzle clogging, and can complete long-term high-intensity flexible printing. ✔Ultrabase Platform Board -- Anycubic professional-grade brand 3D Printer Kit, the patented platform board is covered with a layer of micro-holes, providing excellent adhesion. After cooling down, it is easy to remove the model from the platform. ✔Material Interruption Detection & Continuous Printing -- When the filament runs out, the 3D Stereo printer will automatically pause printing and turn on the smart reminder. You can reload the filament with a single tap. When there is a power failure during use, you only need to choose to continue printing when the power is turned on, and Anycubic FDM 3D printer will still show you a complete model. ✔Easy assembly -- Just use the 8 fixing screws in the accessories to install the printer, and the assembly can be completed in 3 minutes. Not only for expert users but also for beginners with zero basics, there is no burden of assembling a 3D printer. ✔Suspended Filament Rack -- The single-piece suspension design makes the supply of filaments more smoother, saving space and more convenient. Compared with other home 3D printers of the same size, this machine can print up to 8.27 x 8.27 x 8.07 inches, providing you with a larger printing area.
    269.00 $
  • ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H)
    Fast Assembly, Mega X 3D printer came in two modules and all it takes is to plug in 12 screws and 3 cables, easy to assemble and get printing right out of the box, Perfect choice for beginners and veteran High Print Precision, This 3D Printer’s print precision is greatly improved by equipping it with Y Axis Dual Sideway Design and Z-axis dual screw rod design, The pitting in the skin and texture in the clothing all can shows up Large Build Volume, This FDM printer comes with larger build spaces available, At 11.81in(L) X 11.81in(W) X 12in(H), able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea Patented Heat Bed, No hassle of sticker any more, Ultrabase bed surface coated with patented microporous coating, allowing the print holds strong when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print, Kindly note, The bed will not go over 90 degree More Function,1 Resume Print: One click to resume from the last recorded position when suffered power outages, 2 TFT Touch Screen: As responsive as operating on the phone, 3 Meanwell Power Supply: Compliance with UL60950-1, enhance the safety performance, 4 All ANYCUBIC 3D printers backed with lifetime technical support
    489.99 $
  • GEEETECH A10M 3D Printer with Mix-Color Printing, Adjustable Dual Extruder Design, Filament Detector and Break-resuming Function, Updated 3mm Hotbed Kit,Prusa I3 Quick Assembly DIY kit
    ✔️【Unique Double Color Printing】2 extruder module and 2-in-1-out hot end, which deliver 4 types of printings--Single color, Double color, Graded color and Mixed color, which will greatly enrich your 3D printing experience. ✔️【20 Minutes Self-Assembly】The modularized design divided the printer into 6 modules--Gantry kit, Bottom kit, Extruder motors, PSU kit, LCD display kit, Filament holder kit, what all you need to do is to tighten screws, connect wires correctly and fine-tune belt tension and adjust heat bed when necessary. The whole process takes about 20 minutes. ✔️【GT2560 V4.0 Marlin Control Board】Using Marlin firmware, stable and easy to operate. It will support auto-leveling function. All what you need to do is to order a 3d touch/bl touch, connect the sensor with A10M, update the firmware and then simply debug. ✔️【Filament Detector and Break-Resume】The filament detection system will alert you to change filament when the printer runs in air or the spool is empty. The resurrection system is added to save real-time printing status and to resume the printing job exactly at the same place where it has been stopped. ✔️【After-sale Services】 Lifetime technical assistance. If you have any problem, you can reach out us via E-mail/FB.⎃⎃⎃⎃DEAR CUSTOMERS: If you have any problem, please contact us at the FIRST time,we will try our BEST to help you solve problems.you can reach out us via E-mail/FB.⎃⎃⎃⎃
    289.00 $
  • Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer
    Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head. Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel. 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm. Compatibility: compatible with all 1.75mm PLA ABS 3D Printer Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend)
    10.99 $
  • Geeetech 3D Printer,Wooden Prusa I3 Pro W Desktop 3D Printer DIY Kit with WiFi Cloud,200x200x180mm(7.9''7.9''7.1'')Printing Size,Support 3D WiFi Module, EasyPrint 3D App.
    1. Open Filament System: ABS/PLA/Flexible PLA 2. Reliable print quality: High layer resolution and low tolerances provide smooth surface finish and stable object texture. Easy to assemble and adjust: Simplified and custom-fit parts, time-saving and reasonable build. 3. Increased stability and reliability: 6mm thick, high quality wood panels and reinforced structure allow the Pro W to work smoothly. 4. Cloud 3D Printing Solution: Use a WIFI module for wireless 3D printing. (Attention: The WIFI module is not included and must be purchased separately) 5. EasyPrint 3D App: With printing and control features, a gallery of free 3D models and a 3D printing community. Combined with the WIFI feature, the EasyPrint 3D app offers great 3D print cloud experience.
    169.00 $
  • FlashForge Finder 3D Printers with Cloud, Wi-Fi, USB cable and Flash drive connectivity
    Slide-in build plate allows printed objects to be easily removed 3.5-Inch full color touchscreen with intuitive icons makes for easy operation Sturdy, plastic alloy construction ensures stable prints Safe, non-heated build plate Wi-Fi, usb and flash drive connectivity.Positioning Precision: 0.0001 inch on Z axis, 0.0004 inch on XY plane Resolution: 0.004 inch
  • [UL Listed] OMNIHIL AC/DC Adapter Compatible with ALUNAR SLA 3D Printer
    Adapter Rating: World Wide 100V ~ 240V 50/60Hz - UL LISTED All products are tested to exceed/meet standard specification OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection) FREE RETURN SHIPPING / 5 YEAR FREE WARRANTY 3RD-PARTY ADAPTER NON OEM PARTS