Discover: 3d printer candy filament | Forums Ratings

  • HAWKUNG 10Pcs 3D Printer Filament Vacuum Compression Reusable Storage Bags with Manual Air Pump for Filament Storage, Compress and Remove Air to Prevent Humidity in Filament, 30x34cm
    【Durable material】Made of PE/PA which is food grade plastic, durable and can be reusable and resealable for several times. Not only can be used to store 3D printer filaments, and they also can be applied to store candy, coffee beans, dried flowers, baking, dried fruit, cookie, tea, nuts and so on. 【Size】30 x 34 cm (11.81 x 13.39 inch), which will fit most 1kg (2.2lb) spools. Double-layer zippers allow the vacuum bag to seal closely for a longer time. Can make records on Notice Area, such as 3D printer filament material and date. 【Airtight Vacuum Seal】It adopts fully sealed process,excellent sealed protection,no impurities,which solves the problems of 3D printer filament and other consumables directly exposed to the outside and easy to get dust and moisture, which increase the life of 3D printer filament. 【How to Use】Simply put your spool in the bag, humidity strip to seal it well with sealing clip then use the hand pump to remove excess air. Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. Store the 3D filament in a dry bag to keep the filament dry after the model is printed. Note: The blue label cannot be torn off, so as not to affect normal use. 【Package Includes】10 Pcs Vacuum Bag, 1 Pcs Hand Pump, 2 Pcs Sealing Clip. Use these vacuum bags to keep your filament dry and continue to have great creations. Instead of a drybox, box, or boxes, use this as a dryer dehumidifier container.
  • 3D Printer PLA Filament 1.75, Candy Red PLA Filament 1.75mm, Fit FDM 3D Printer, 1KG Spool, Dimensional Accuracy +/- 0.02 mm, PLA Candy Red
    【1.75MM Diameter ±0.02mm, Smoothly Printing】 JAYO PLA filament made of premium PLA raw material, advanced CCD diameter measuring and self-adaptive control system in the manufacturing process, dimensional accuracy is 1.75mm+/- 0.02mm, easy to print without clogging. Spool is 1KG spool(2.2lbs). 【Strong Adhesion, Low Odor】 JAYO PLA filament produce in strictly procedures, no bubbles, ultra smooth technology, low odor, provide you a pleasure printing experience. 【100% Vacuum Packaging】 Good vacuum packing ensures the filament are dry and in good toughness, not easy to break. 【Compatible with 99% FDM 3D Printer】 JAYO PLA filament 1.75mm works perfectly on 99% FDM 3D printers, because most DIY printers use 1.75mm in size. Recommended printing temp/nozzle temperature: 215-230℃, base plate temperature: 70°C. 【12 Months Warranty & Friendly After-Sales Service】 N.W. 1KG PLA candy red, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!
  • PRILINE PLA-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Florescent Yellow (Pantone Code:394C)
    Material: PLA(Polylactic Acid) - Color: Yellow - Weight: 1 KG (approximately 2.20 lbs) Spool Size: 1.75mm,Tolerance Level : ± 0.03mm - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20" Recommended Printing Temp/Nozzle Temperature: 180-220°C(356-428°F) - Base Plate Temperature: 0-50°C(32-122°F), PLA filament can be processed at 185 degrees Performance Advantages: The strength and toughness of our PRILINE PLA filament is higher than the general PLA filament on the market. The air is filled with slightly sweet smell likes candy when printing Notes: Because of shooting light or display resolution, there are some color differences between the pictures and objects. Please refer to Pantone Num before purchase / Refund Guarantee in 30 Days: We trust our products. If you aren't happy with our 3D printer filament, tell us and We will arrange a refund for you
  • 3Doodler Start Mixed Colors 3D Printing Filament Refill Pack (X24 Strands of Plastic) - Candy Store
    The 3Doodler Start plastics have been subjected to the strictest standards of safety testing. Hours of doodling fun: 3Doodler start plastics extrude to 6 times the original length, so one 6 inch Strand gives over 35 inches of doodling. Choose from 19 vibrant colors: available as single color packs containing 24 strands, tubes containing 100 strands, and mixed color packs containing 24 strands. Designed safe for ages 6+ to use, easy-to-use and mess-free. Compatible with 3Doodler start 3D Printing pen. Not for 3Doodler Create+/Create/V2/V1.
    42.13 $
  • WYZworks PLA 1.75mm [ Candy Redish Orange ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]
    THERMOPLASTIC POLYLACTIC ACID [MSDS APPROVED] - With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Natural PLA Premium Quality MSDS Approved 3D Printer Filament. HIGH SPECS - PLA [Polylactic Acid] 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed. Quality Black Filament With The Highest Dimensional Accuracy Means The Nozzle Won't Get Blocked. Don't Risk Damaging Your Expensive 3D Printer With Unvetted Filaments. TEMPERATURE RECOMMENDATION - Recommended Printing Temperature range 170°C - 230°C - PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. CUSTOMER SUPPORT - Get The Absolute Best Filament & Support At Half The Cost Of Main Brand Filaments. Save Money Without Risking Your Equipment, Print Quality, & Time! HIGH COMPATIBLE - For most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers.
    24.99 $
  • 10 Pieces 3D Printer Filament Storage Bags Sealable Vacuum Compression Packaging Pouch Thickened Nylon Bags for Most 1kg (2.2lb) Spools, 11.8 x 13.4 Inch
    What you get: package includes 10 pieces 3D printer filament storage bags, sufficient to meet your requirement Size information: sealable filament storage bag is approx. 11.8 x 13.4 inch, which will fit most 1kg (2.2lb) spools Durable material: vacuum compression packaging pouch is made of heavy-duty nylon, non-toxic and durable, and you can put items in them safely Vacuum compression bags: the bags can be applied with the vacuum machine, and can protect the filaments from moisture, dust, insects, mold, odor, etc. Extensive application: the thickened nylon bags can be 3D printer filament storage bags, and they also can be applied to store candy, coffee beans, dried flowers, baking, dried fruit, cookie, tea, nuts and so on
    8.45 $
  • XIAOMINDIAN Filament PLA Plus 1.75MM 1KG Silk PLA 3D Filament for 3D Printer Supplies Neat Winding Printing No Tangle Printer Parts (Color : Silk Candy Dandy)
    Silk pla plus filament is degradable, non-toxic material, close to silk effect, toughness of higher than 50 times PLA. Neat winding filament print smoothly, no tangle. 100% no bubble 3d printing filament. Material: PLA 3D Printer Parts Accessories
    48.61 $
  • Polymaker PolyTerra PLA Bioplastic Based 3D Printing Filament, Matte PLA Filament, 1.75mm Filament Candy 1000g(2.2lb), Fit Most FDM Printer
    Excellent printability: PolyTerra️ PLA features great overhang and bridging capability. It is also capable of reaching faster printing speeds while maintaining consistent extrusion. Matte/Smooth finish: PolyTerra️ PLA gives a smooth and matte surface finish on your prints, helping with hiding the layer pattern specific to FFF 3D printing. For every spool of PolyTerra️ PLA produced, Polymaker will plant one tree in the area where the spool will be purchased. Easy support removal: One of the main advantage of PolyTerra️ PLA is that it is designed to being able to support itself and breakaway easily. Diameter: 1.75mm ; Weight: 1kg
    19.99 $
  • Superfila PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Fit for Most FDM 3D Printer and 3D Pen,Red
    【1 KG (approximately 2.20 lbs) Spool】1.75mm PLA Filament,High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily ,Ideal for Indoor Printing.Suitable for both beginners and experienced users. . 【Strong Compatibility】No Edge Warping, Reduce Jamming, No Bubbles,Strong Toughness,High Gloss,Print Smooth,Universal compatible with most 1.75mm 3D Pens/3D Printers on market 【Vacuumed Sealed Packaging】 1.75mm PLA filament packaging will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. 【Environmental Friendly】 PLA filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.No harm to user and environment 【Guarantee & Service】:We are Confident about PLA Filament Quality,Within 24 Hours Reply,100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME.Pls Fix Filament End after each time Printing,be Sure to Insert Free End of Filament into Holes to Avoid Being Tangled for Next Time Use
  • Tiertime UP Fila Premium PLA 3D Printer Filament, Low Odor, Consistent 1.75mm Diameter,1KG (500g×2 Spools), Burgundy Red C-22-09
    1KG (500g×2 Spools), 1. 75mm filament diameter; Low odor; Excellent strength, consistent diameter; Glossy texture with vivid colours; Vacuum packing with desiccant, resealable ziplock bag included.