Coach teaches: Obstacle robot arduino code | Technical sheet

  • Arduino For Dummies (For Dummies (Computer/Tech))
  • How to Make a Robot
  • ELEGOO UNO R3 Project Smart Robot Car Kit V 3.0 Plus with UNO R3, Line Tracking Module, Ultrasonic Sensor, IR Remote Control etc. Intelligent and Educational Toy Car Robotic Kit for Arduino Learner
    ELEGOO Smart Robot Car: An educational STEM kit beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education. Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc. Easy to Assemble: All the module interface has been modified with XH2. 54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors. Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included. Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Note:(Applicable Age : 12+)To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.
  • TFmini-s Lidar Sensor 0.1-12m Measurement Range Distance Single-Point Ranging Finder Module UART / I2C Compatible with Pixhawk,Arduino and Raspberry Pi for Drone/Robot Obstacle Avoidance
    [Upgraded TFmini Lidar Module] TFmini-s, based on TFmini, is a single-point short-range LiDAR sensor. Inherited characters of low cost, small size and low power consumption from TFmini,which greatly improved its performance [High Performance] TFmini-s accuracy can reach up to ±1% at full range distance of 12m,increasing the measurement frequency to 1000Hz. The dead zone is shortened to 10 cm improving accuracy and stability. Ambient light immunity is 70Klux and central wavelength is 850nm,but it only keep 5.3g at weight [Low Power Yet High Frame Rate] In low power consumption mode, the maximum power consumption can be lower than 100mW, reducing system power consumption and further prolonging LiDAR lifetime [Optional Commutication Interfaces] To improve applicability, TFmini-s supports common communication interfaces — UART, IIC and IO.TFmini-s version is UART by default. If you need IIC, please switch by yourself. It also compliant with CE,RoHs,and FCC certification
    38.09 $
  • HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot
    Can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. The effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V
    7.99 $
  • OSOYOO Robot Car Starter Kit for R3 | STEM Remote Controlled Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Kids Teens Adults
    SIMPLE, EDUCATIONAL, FUN PROJECT — Control your OSOYOO Robot Car V2.0 System by Android and iOS App, allowing many additional functions such as imitation driving, WiFi controlled auto driving and battle bots (must purchase at least two kits). This intelligent, new technology supports various projects such as line tracking, object motion following, obstacle avoidance and gravity sensing control. PROGRAMMABLE STARTER KIT FOR KIDS, TEENS, ADULTS AND PROFESSIONALS – The OSOYOO Robot Car Kit V2.0 is fully compatible with R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators, learn about the Internet of Things (IoT) and get hands-on programming, coding, electronics and robotics experience. THE BEST VALUE PACK — This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board, USB Cable, Model X Motor Driver Module, WiFi Shield, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, 18650 Battery Box, battery and charger, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET — 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Module Assembly, Philips Screwdriver, Basic Tutorial CD with Video, Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance GROWS WITH YOUR KIDS – OSOYOO Robot Car Kit for Arduino is a perfect gift for your kids who are interested in programming, robotics, electronics, or mechanical design as it can improve logical thinking, mechanical, and electrical abilities of your kids and let your kids learn how to build and program fully-functional robots
    64.75 $
  • OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot Raspberry PI 3.
    IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay. It has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal). Can be used for 3-5V DC power supply modules. It has red power indicator.
    9.97 $ 10.97 $ -9%
  • Yahboom UNO R3 DIY Smart Robot Car Kit with Camera STEM Education with Tutorial CD for Kids Teens Adults Remote Control Car
    Rotatable camera head : Robotic camera not only can be rotated 180°up-down and left-right to capture the angle you want in the widest range,but also record video and take pictures. Flash ultrasonic ranging module : In addition to ranging and obstacle avoidance, the ultrasonic module can also control the light of various colors through program code, such as smart robot's lovely eyes.Support for scratch 3.0 programming. This robot car really excellent and safe to be a perfect gift for your children and friend to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education. Easy installation : You can do the installation easily for the robot, no additional soldering is required, and we have the installation video available on the CD, and you can also view the installation video on the details page.Anti-reverse socket design between module and motor and expansion board, each module has a dedicated socket and reduce the chances for errors Detailed tutorial : Don't worry about your child losing direction, because yahboom always provides detailed courses and technical support. You can get detailed tutorials from the CD or Yahboom official website, often the latest tutorials on the website.It will teach every users how to assembly the smart robot car kit
    69.99 $
  • Robobloq STEM Metal Q-Scout Robot Mechanic Kit with Remote Control, Line Tracking, Ultrasonic Sensor, Music Playing for Kids Program Learning of Scratch, Arduino and Python(Basic Version)
    【Programmable robot kit】Q-scout is designed for both new coders and professionals to have an interactive play with coding robot. From the graphical drag-and-drop coding of Scratch through the Robobloq App control (IOS/Android) to the high level programming of Arduino and Python through PC MyQode software (Windows/MacOS/Chrome OS system), players can have a progressive coding learning with Q-scout. 【Easy to Assemble and Transform】The assembly is friendly to all ages. Users can complete it within an hour based on our 3D instruction , and decorate it with the major mechanical building block sets, such as LEGO blocks. Q-scout can also transform into different structures with the combination of expansion packages from Robobloq, which is a great educational gift for children to improve their manipulative abilities and teamwork competency. 【Multiple Functions and Fun to Play】Equipped with various electronic modules and sensors, Q-scout is a talented robot that has multiple functions. It not only can be controlled remotely through the App, but also can follow your designated route and avoid obstacles in front of it under different modes. Children can also play the music from Q-scout’s music library, which brings lots of fun for the family entertaining education. 【for Indoor /Outdoor Play】 The premium components are the main reason for Q-scout standing out from the others. The shiny mechanical robot is matched with stronger motors, thicker alloy, higher quality ABS materials and more stable rubber tires, allowing it to run indoors and outdoors, on the floor, concretes and even jagged rocks. 【Reliable Customer Service】 Robobloq products are traded in over 20,000 schools in 50+ countries, which gained wide recognition and supports from customers. Our customer service will provide you with reliable and timely pre-sales and after sales services in 24 hours x 365 days. Feel free to contact with us if you have any questions or problems in products or program learning.
  • ELEGOO Penguin Bot Biped Robot Kit Compatible with Arduino Project with Assembling Tutorial,STEM Kit for Hobbyists, STEM Toys for Kids and Adults, Black Version
    【Projects based on Arduino】ELEGOO penguin bot is developed based on Arduino platform and has many talents inside, like auto-follow, obstacle-avoidance, IR-remote control, music player, dancing and you can always customize it by re-programming 【Stylish and Adorable Design There are 3 color version to choose from- red, black and transparent. It also comes with 6 delicate-designed head covers (or head masks) which will make Penguin Bot even cuter and it allows you to customize the covers by drawing your own pictures 【Easy-to-Follow Tutorial Comes with an exquisite user manual which will guide you how to build up the bot step by step and the CD tutorial enclosed in the kit will teach you how to program the bot, suitable for parents and kids to have a hands-on experience together and learn robotic knowledge at the same time 【STEM Toy for Everyone Perfect gift for kids 10 years old or older even adults who are interested in electronics or robotics will love this kit and use it a STEM kit to learn engineering and programming while playing with it 【Elegant and Safe Package Well-designed and sturdy container stuffed with all the tools and parts like tweezers, magnetic screwdriver, servo motors and spare screws, which are stored in zip-lock bags.