Coach teaches: Arduino programming mac os x | Test & Recommendation

  • Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
    Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL. LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. Works the same as original Nano, runs perfectly on programming software. Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power. LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.
  • SunFounder Smart Video Car Kit V2.0 PiCar-V Robot Kit Raspberry Pi 4 Model B 3B+ 3B 2B Graphical Visual Programming Language,Video Transmission,Remote Control by UI on Windows Mac Web Browser
    STEM ROBOTICS KIT - Perfect robot kits for adults to learn Raspberry Pi (Compatible with RPi 4B/3B/3B+/2B/2B+, Raspberry Pi is NOT included), robotics, electronics and program. The PiCar-V is a funny way for teens and parents working together to build and use. UPGRADE VERSION - Improved technology based on user feedback. Support solid plate and the white Servo Motor can well protected by Torsion protection,Power failure protection after over load. IMAGE TRANSMISSION - Wide-angle USB webcam to real-time image/video transmission. REMOTE CONTROL - Remote control with the UI on PC or on a web browser (mobiles, tablets…) EASILY CODING - You can learn how to code faster and easier than ever with a visual programming language software or Python code.
  • USB to TTL Adapter, USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’
    Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable design, and draws power directly from your PC/laptop via the USB connection, no need for an external power adapter Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections; POW(power), RXD/TXD transceiver communication LED indicator design, which can show serial adapter status and data activity at a glance Windows 8 and above OS, Linux and Mac OS will install FTDI driver automatically, but NOT compatible with Chrome OS. For details of OS compatibility and installation guidance, please scroll down this page and take a look at 'Product description' Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules, flash firmware on hard drive, update transmitter, interface to set top box and more What you get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer 1 year guarantee on product, your satisfaction is our passion
  • Canamaker Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered
    ✓ ARDUINO COMPATIBLE - Use the Nano-C with the Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes) ✓ PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes ✓ TINY FOOTPRINT - At only 1.75" x 0.75" x 0.25" and weighing less than 0.25 oz, the Canamaker Nano-C uses less breadboard space and can fit in all but the smallest projects ✓ FLEXIBLE - The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces ✓ EASY TO CONNECT AND GET STARTED - Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze. USB cable not included
    6.99 $
  • ELEGOO Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
    The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link. It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
    19.99 $
  • DSD TECH USB to TTL Serial Adapter with FTDI FT232RL Chip Compatible with Windows 10, 8, 7 and Mac OS X
    With this USB to TTL adapter, you can establish communication with your board/MCU through your computer. Maximum transmission speed up to 3Mbps The main chip is FT232RL from FTDI ,High stability. LED indicator for TX,RX,Power,It is very useful when you are debugging or downloading. Pin Definition: CTS,RTS,RXD,TXD,GND,VCC;Support VCC output 3.3V and 5V, switch by jumper. Works with Windows 10, 7(32/64bit) Vista 2008, XP, 2003,Mac Etc. WARRANTY:We back this FDTD USB to TTL Converter with 12 months warranty.If you meet any question, Please contact us, We will fix your issue within 24 hours.
    10.99 $
  • DSD TECH USB to TTL Serial Converter CP2102 with 4 PIN Dupont Cable Compatible with Windows 7,8,10,Linux,Mac OSX
    Designed to be used for USB to TTL electronic projects, easy to connect to your MCU. Status LED for TX,RX CP2102 USB to TTL Transfer chip from Silicon Labs,Industrial chip, high quality, super stable. Standard USB power supply, the lead pin includes: 3.3V, GND, TXD, RXD, 5V, GND Supports Windows 2000, XP, Vista, Window 7,8,10, Mac OS 9, Mac OS X & Linux WARRANTY:We back this usb to ttl Converter with 12 months warranty.If you meet any question, please contact us, we will fix your issue within 24 hours.
    7.99 $
  • Nextion 3.5" Display NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 for Arduino Raspberry Pi
    NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors. You can buy nextion enhanced 3.5 here, https://www.amazon.com/dp/B07916KQ76 You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it. Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB. You can buy most nextion display here, https://www.amazon.com/nextion If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
    37.98 $
  • ELECROW Crowpi Raspberry Pi 4 3 b 3b+ 4b+ Kit Raspberry Pi Learning Programming Kit with Sensors - Advanced Version
    Raspberry Pi 4 Model B Starter Kit: Crowpi advanced version comes with Raspberry Pi 4. You can also use the raspberry pi 3 b 3b+ 2 and more on crowpi. Rasberry Pi Projects: With the sensors buttons and output devices all pre-wired in one package you can start doing projects instantly and easily with crowpi. Raspberry Pi Sensors: The Crowpi raspberry pi 4 programming kit is jam-packed with lots of buttons such as 19 different sensors in a tidy easy to use package. You don't have to wait and wire things. Build Quality: Solid ABS shell and well made components in one place make it strong and convenient to travel. Programming Lessons: This raspberry pi 4 learning kit ships with step by step instructions and provides 21 lessons to take you through identifying components reading code and running it in the terminal.
  • HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
    The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver. SCM system can be completed within a file MicroSD card .Support Micro SD Card, Micro SDHC card (high speed card). 3.3V regulator circuit: LDO regulator output 3.3V for level conversion chip, Micro SD card supply. Level conversion circuit: Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal. Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.