Coach teaches: Arduino notone example | Forums Ratings

  • SparkFun 9DoF IMU Breakout-ICM-20948 Low power I2C & SPI enabled 9 axis motion tracking Includes Logic shifter Qwiic connection GPIO pins Digital Motion Processor Accelerometer Gyroscope Magnetometer
    ICM-20948 9DoF sensor with On-board digital motion processor (DMP). Digital-output temperature sensor Triple-axis MEMS gyroscope with user-programmable full-scale range of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps Triple-axis MEMS accelerometer with programmable full scale range of ±2g, ±4g, ±8g, and ±16g Triple-axis silicon monolithic Hall-effect magnetic sensor with full scale measurement range to ±4900 µT 1.95 V to 3.6 V supply voltage. 2x Qwiic Connection ports for solderless connection. (Arduino-Compatible). Wires/Cables not included.
  • Aideepen Proto Screw Shield Assembled Terminal Point Prototype Expansion Board Opening Source Reset Button PCB Bareboard D13 Universal LED for Arduino
    【Can Plug the Screw Shield into the Arduino】It has pins on the bottom which correspond to the female connectors on an arduino so that you can plug this shield into the arduino. Once it's plugged in it's very secure very snugly fit so it doesn't come off very easily 【Can Stack Other Shields】It has female connectors on the top corresponding to those on the Arduino so that you are not losing those when you put the shield on it 【Easy to Fly Line Connection】It has those holes on the side which are also connected to the same connections here and normally you can't easily stick a write into these holes. However if you unscrew the corresponding screw on the top you can that insert a wire and then you screw the screw back in again and then it's very hard to get the wire out so this enables a secure connection to the Arduino 【Easy to Connection】Provide terminal for the Arduino IO, convenient port connection 【Can be used to Extension Plate】With Proto shields, can be used as a prototype extension plate in the middle
  • Arduino Nano 33 IoT with Headers [ABX00032]
    The ease of use of a Nano board with the addition of secure IoT and BT connectivity Small (48mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating
  • HiLetgo BMX055 9DOF Attitude Sensor IMU Precision Integrated 9-Axis Attitude Sensor IIC I2C for Arduino Replace MPU9250 with Pin Header
    BMX055 9DOF IMU precision integrated 9-axis attitude sensor Module Replace MPU9250, high Precision. 9-Axis integrated Attitude Sensor
    9.19 $
  • Cytron Maker Uno Plus: Simplifying Arduino for Learning Coding and microcontroller
    Upgraded with FTDI chip. CE, FCC and RoHS compliance. Comes with USB cable. Extra LEDS, Buzzer and Push Button on board, no wiring! Elegant design with purple pcb
    17.90 $
  • Emakefun Development Board, Development Board for Arduino R3 with Micro Interface and BLE Wireless Module,Base on ATmega328P for Project
    Bluetooth module:Wirelessly connect your phone via APP Micro interface:You can use the data cable of your phone connect with computer Chip:ATmega328P,same as the official version Quality:Solder is Very Clean
    13.89 $
    21.98 $
  • Arduino Nano Every with Headers [ABX00033]
    Small (48mm x 18mm), robust and powerful board Based on the ATMega4809 AVR processor Clock 20MHz, Flash 48KB, SRAM 6KB, EEPROM 256byte Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano. Power supply architecture based on a high efficiency DC-DC converter allows powering the board at up to 21V and to drive output peripherals with up to 950mA without overheating. Get started in minutes with thousands of sketches available in open source.
    14.01 $ 15.00 $ -7%
  • Gowoops Micro Board for Arduino, Leonardo Mini Controller 5V 16 MHz ATmega32u4 Module
    Micro Board for Arduino is a mini controller based on Atmega32U4 Micro Board for Arduino has 20 input output pins(7 PWM output and 12 analog input) Due to super small zise, Micro Board for Arduino is intergrated to mini breadboard very easily Owning to Atemga32U4,Micro Board for Arduino can realize USB communications and control as the same as Leonard board for Arduino The characteristics of ecological USB supporting in Atmega32u4 can also make Micro Board for Arduino to simulate mouse and keyboard, greatly improving the application.
  • HiLetgo 5pcs STM8S103F3P6 STM8 ARM Minimum System Development Board Module for Arduino
    Use STM8S103F3P6 as the master IC Support SWIM debug mode